468055

JBSystems MCD150 Manual

4
Zoom out
Zoom in
Previous page
1/27
Next page
ENGLISH OPERATION MANUAL
JB SYSTEMS
®
3/49 MCD150
To avoid condensation to be formed inside, allow the unit to adapt to the surrounding
temperatures when bringing it into a warm room after transport. Condense sometimes
prevents the unit from working at full performance.
Choose the place where you put your installation very carefully. Avoid presence of heat
sources. Avoid places with vibrations or places that are dusty and humid.
The player will work normally when installed on a surface with max. 15° inclination.
Be very careful while handling CDs, do not touch them with wet or dirty hands.
Discs that are dirty must be cleaned with special designed cloth and cleaning products.
Do not use CDs that are badly damaged (scratched or deformed) they can damage your
appliance.
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
In order to prevent electric shock, do not open the top cover. If a problem occurs, contact
your dealer.
Do not place metal objects or spill liquid inside the CD player. Electric shock or
malfunction may result.
This CD player uses the semiconductor laser. To allow you to enjoy music at a stable
operation, it is recommended to use this in a room of 5°C – 35°C.
The compact disc player should not be adjusted or repaired by anyone except properly
qualified service personnel.
This unit may cause interference to radio and television reception.
CLEANING THE CD-PLAYER:
Clean by wiping with a polished cloth slightly dipped with water. Avoid getting water inside
the unit. Do not use volatile liquids such as benzene or thinner which will damage the unit.
CONNECTIONS
Use the supplied cinch cable to connect the audio output of the CD player with a CD
input on your mixing unit.
Also connect the fader start cable if your audio mixer has fader start connections.
(Synq® or Pioneer® compatible)
Connect the mains cable.
ENGLISH OPERATION MANUAL
JB SYSTEMS
®
4/49 MCD150
CONTROLS AND FUNCTIONS
1. CD ACCESS DOOR: Used to load and unload the CDs. Use the eject button (3) to
open the cover and simply close it by hand.
2. STOP BUTTON: Stops playback immediately. Use this button AT ALL TIMES before
opening the CD access door!
3. EJECT BUTTON: Press this button to open the CD access door.
Important: always stop playback first, by pressing the STOP button (2), before using
the EJECT button!
4. SGL/CTN Button: With this button you can choose between “single track mode” and
“continuous play”.
Continuous play: The complete CD will be played without interruption. (mostly
used in pubs)
Single track: Player stops at the end of each track and waits at the beginning of
the next track. The player waits at the first music note of each track. This means
that badly indexed CDs will not interfere with the instant start capabilities of this
CD player. This is a very useful feature for deejays!
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBSystems MCD150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBSystems MCD150 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info