793381
109
Zoom out
Zoom in
Previous page
1/127
Next page
109
JBL Studio 2 天花板嵌入式建筑扬声器
指引手册
安装说明
警示:请勿将高音扬声器安装挡板当做把手来移动、携带或
摆放扬声器。这么做会使挡板受损。该等损坏不包含在扬声
器的保修范围之内。
JBL 建筑扬声器安装极为简便。但是,如果您无法清晰而充
分地理解和遵守本手册中的说明,或者您没有把握以适当方
式安装这些扬声器,请联系您的经销商或合格的安装员。
警告:对于硬件的不当安装或因不当安装或
扬声器掉落导致的人身伤害或产品损坏,
HARMAN International 概不承担任何责任。
连接至功放
警示:关断电源
在完全安装扬声器之前,您必须连接扬声器线缆。为避免安
装过程中发生电气短路和电涌而对音频系统及您自身造成损
坏或伤害,请在安装扬声器之前关闭所有音频系统电源。
扬声器线缆
使用优质扬声器线缆,使您的 JBL 天花板嵌入式扬声器达到
最佳性能。
如果线缆长度小于 50 英尺(15 米),请使用至少 16
扬声器线缆。
如果线缆长度在 50 英尺至 100 英尺(15 米至 30 米)之
间,请使用至少 12 号扬声器线缆。
如果线缆长度大于 100 英尺(30 米),请使用至少 10
扬声器线缆。
注意:所有扬声器线缆必须符合关于用于天花板嵌入式应用
的所有当地建筑和安全规范。
连接
将功放或接收器背面各个声道的正极 (+) 端子连接到相应的
扬声器上的正极(/红色)端子;将功放或接收器背面各个
声道的负极 (–) 端子连接到相应的扬声器上的负极(/黑色)
端子。连接时,请勿错接极性(即:将 + 连接至,或者将
连接至 +)。否则,会导致声场成像质量下降和低音响应
减弱。
负极端子(黑色) 正极端子(红色)
按压接线柱,打开小孔,将线缆的裸露端插入孔中;然后释
放接线柱,以固定好线缆。
警示:为避免发生短路而对您的设备造成损坏,请确保正极
和负极绞线互不接触,且不接触扬声器框架等金属部件。
109


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL STUDIO 2 6IC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL STUDIO 2 6IC in the language / languages: All languages as an attachment in your email.

The manual is 18.65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info