810177
6
Zoom out
Zoom in
Previous page
1/12
Next page
5
NO. BUTTON Short Press Long press
4 Press to switch
MAP lights based
on sequence:
100% brightness ->
50%brightness -> OFF
Press and hold for
2 seconds to switch
light show patterns
based on sequence:
Rock -> Flow -> Cross
-> Ripple -> Flash ->
Static1 -> Static2 -> Mix
-> DIY -> OFF
5 Press to enter
Bluetooth pairing
mode.
Press and hold for
5seconds to disconnect
all Bluetooth devices
and enter Bluetooth
pairing mode
6 Press to switch
between Operation
mode and Deep
standby mode
7 MAP Lights
6. USING YOUR RALLAYBAR
6.1 Bluetooth connection
You can use your RALLYBAR as an external speaker for your
Bluetooth enabled smartphone or tablet.
1) Press to enter Bluetooth pairing mode.
2) Select “JBL RALLYBAR”, “JBL RALLYBAR S” or “JBL
RALLYBARXL” to connect.
3) Once successfully connected, audio will stream from your
Bluetooth device to this speaker.
BT COONECTION
DEVICES
JBL RALLYBAR
JBL RALLYBAR S
JBL RALLYBAR XL
Bluetooth
Bluetooth
< 10 m (33 ft)
1
2
Off Power off
White (Constant) In operation mode But no
Bluetooth connection
Blue (Constant) Bluetooth connected
Blue (Flashing) Bluetooth pairing
Notes:
This speaker can memorize a maximum of 8 paired devices. The
ninth paired device will replace the first one.
Bluetooth performance can be affected by the distance between
this product and your Bluetooth device and the environment of
operation.
To terminate the Bluetooth-enabled device:
Turn off this speaker.
Disable Bluetooth on your device; or Move this speaker
beyond the Bluetooth operational range.
To reconnect the Bluetooth-enabled device:
When you turn on this speaker next time, it tries to reconnect
the last connected device automatically;
If not, manually select “JBL RALLYBAR”, ”JBL RALLYBAR S”
or “JBL RALLYBAR XL” on your Bluetooth device to start a
connection
6.2 USB Connection
With your RALLYBAR, you can enjoy music that is stored on
a USB storage device such as an MP3 player. Plug your USB
storage device into the USB port of your RALLYBAR. The music
will play automatically. If not, please check if the USB device
contains playable audio contents.
USB CONNECTION

Supported Audio Format
Extension Codec Sample rate Bitrate
WAV PCM 44.1KHz ~
192KHz
< 5Mbps
LPCM 44.1KHz ~
192KHz
< 5Mbps
MP3 MPEG1 layer1/2/3 32KHz ~
48KHz
32Kbps ~
320Kbps
MPEG2 layer1/2/3 16KHz ~
24KHz
8Kbps ~
160Kbps
MPEG2.5 layer3 8KHz ~
12KHz
8Kbps ~
160Kbps
Tip:
1. The speaker plays audio files on the USB storage device from
the root folder to the last level of subfolders in alphabetical
sequence. Up to 8 levels of subfolders are supported.
2. Supported USB Drive File System: FAT16, FAT32
6.3 AUX connection
6.3.1 Aux-In connection
1. Connect a 3.5mm audio cable (not supplied) to:
the Aux-out port of your portable audio device or headunit in
the car.
the AUX-in port of this speaker
2. Turn on your portable audio device or head unit and it starts playing.
AUX-IN CONNECTION
1
Aux-in
2
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL RallyBar at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL RallyBar in the language / languages: English as an attachment in your email.

The manual is 7.48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info