810176
28
Zoom out
Zoom in
Previous page
1/37
Next page
28
. If the user selects either of the lower two settings to edit, the preset settings automatically
load the visible settings into the “Custom” preset, so the user can continue editing the
lower two settings.
. “Gate Threshold” enables the user to set the Gate Threshold level to activate when signal on
this channel drops below this Gate Threshold signal level. All signal content below the Gate
Threshold are reduced -100%.
. “Gate Depth” enables the user to set the Gate Depth to only reduce the signal by a limited
amount. Example: When Gate Depth is set to -10bB anytime the channel signal level is below
the Gate Threshold setting level, the signal is reduced by only -10dB. When the input channel
signal is above the Gate Threshold, no Gate adjustment to the audio signal is made.
. Attack
. Hold
. Release
ii. “Compressor” enables editing of the input channel compressor processing. Compressors reduce the
channel signal level above the compressor Threshold setting, by the amount of the Ratio setting.
. To select the COMPRESSOR, rotate the MASTER/MENU knob to the COMPRESSOR eld and
PRESS the MASTER/MENU knob.
. “Compressor” On/Off turns the input channel compressor on or off (i.e. off is compressor in
bypass.)
. “Reset” sets all compressor settings on this channel to factory default.
. “Presets” are available to select for typical creative situations. These Presets have common
compressor settings based on common use cases and can be quickly recalled.
. If the user selects a “Preset”, the lower seven settings are automatically loaded with the
chosen presets settings.
. If the user then selects and edits any of the lower seven settings, the current preset
settings are automatically loaded into the “Custom” preset for further user editing of any
setting.
. “Threshold” sets the signal level where compressor engages. All signal above that Threshold
level will be compressed down by the relative adjustment of the Ratio setting.
. “Ratio” enables the user to set the ratio to percentage the channel audio signal above the
Threshold is reduced when above the Threshold setting.
. OverEasy Enabling “OverEasy” smooths the transition before the signal reaches the
Threshold level to provide a more smooth Threshold character transition. OverEasy is often
desired on rock ballads or speaking panels. Disabling “OverEasy is often turned off when mixing
harder rock or DJ style music.
. “Makeup Gain” can be used to raise the compression result peak reduced audio signal, to now
raise the dynamically reduced signal to better t or stand out in a total mix.
. Warning: Using compressor “Makeup Gain” on already loud audio signals may exceed
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL PRX One at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL PRX One in the language / languages: English as an attachment in your email.

The manual is 9.23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info