Manual JBL Project K2 S9900 (page 12 of 42) (English, All languages)

793356

Zoom out

Zoom in

1/42

The transducers, horns and crossover networks are housed in a visually stunning

enclosure that is reminiscent of both the DD66000 and K2 S9800 systems. The

specially curved bafﬂe provides the sidewalls for the main horn. The top and

bottom horn ﬂares are accomplished by the attachment of precision-molded

SonoGlass® horn “lips” to the upper enclosure surface. The UHF driver is

mounted to a SonoGlass horn which is itself mounted to the back of the

die-cast aluminum housing.

The entire enclosure is constructed with 1-inch (25mm) MDF. The complex

bracing is used to precisely hold the curved panels in exactly the correct shape,

allowing exceptional ﬁt and consistency.

The woofer bafﬂe is 1-inch thick and is tied into perimeter bracing, constituting

an extremely rigid and secure structure. A painted outer bafﬂe is then applied,

surrounding the woofer frame, giving the total combined woofer bafﬂe a

thickness of 1-3/4 inch (45mm). The outer bafﬂe is removable to enable repair

or replacement of the painted surface, should that ever be necessary.

The system is ported on the rear with a tuning frequency of 35Hz. A large

4-inch (100mm)-diameter ﬂared port is combined with the input connections

on a massive die-cast aluminum structure. The entire enclosure rests on four

stainless-steel foot assemblies. Stainless-steel coasters are included to protect

wood and tile ﬂoors from damage from the spike feet. The grille assembly is

constructed of ﬁberglass-reinforced ABS to provide the curved shape. The

grille is securely attached to the enclosure with metal pins and rubber cups.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of JBL Project K2 S9900 in the language / languages: English, All languages as an attachment in your email.

The manual is 2.94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

JBL Project K2 S9900 Manual

Product: