793353
13
Zoom out
Zoom in
Previous page
1/26
Next page
2524
9. Remove the protective wrapping.
INSTALLING SPIKES
Project Everest speakers are shipped with round-tipped feet on
the bottom of the cabinet. If you would like to use pinpoint spikes,
remove the round-tipped feet and replace them with the supplied
pinpoint spikes. If the round-tipped feet are hard to loosen, use an
11/16-inch (18mm) wrench.
IMPORTANT: To prevent damage (scratches, indentations, etc.)
to wood or linoleum oors due to the weight of these speakers,
always use the included coasters. Be especially sure to use the
coasters on tile surfaces to prevent cracking the tile.
REMOVING THE GRILLES
Project Everest loudspeakers are shipped with their grilles installed
on the enclosures. You will need to remove the grilles to access
the adjustment panels when you set up your speakers. You can
remove the grilles with the following procedures.
1. Hold the lower part of the grille with both hands and push it up.
Push bottom of grille UP
2. Pull the bottom of the grille toward you to remove the grille from
the lower pins on the enclosure.
Pull bottom of grille OUT
3. Pull the grille down and remove it from the enclosure.
Pull grille DOWN and remove
Repeat the above steps in reverse order in order to install the
grilles back on the enclosures.
3. Remove the cardboard and packing materials. Remember to
take the accessories out from the upper endpads.
Remove
Accessory
Package
4. Remove the upper endpads.
5. Together with the bottom cardboard, slide the loudspeaker
system down from the bottom board
6. Cut tapes at the corners of the bottom cardboard.
7. Slide the loudspeaker system together with bottom endpads
out toward you.
8. Lift the system slightly on the right and left, in turn, to remove
the bottom endpads.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL Project Everest DD65000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL Project Everest DD65000 in the language / languages: English as an attachment in your email.

The manual is 17.19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info