561706
3
Zoom out
Zoom in
Previous page
1/6
Next page
3
www.jbl.com
Bass Boost button and LED: Press this button to enhance the bass performance. The
button’s LED will glow when Bass Boost is on.
Club EQ button and LED: Press this button to toggle between two EQ mode settings:
“Basic” and “Club.” The Basic setting offers a stereo perspective, while the Club setting
produces a high-energy, more focused sound. When the EQ is set to Club, the EQ LED will
glow white.
When you are using the JBL MusicFlow app, the following additional EQ settings are
available: Wider Stereo Movie, Rock Music, Jazz Music and Gaming.
Source button and LED: Press this button to cycle through the audio sources: Bluetooth,
docked device and Auxiliary Input. The Source button LED will glow to indicate the active
source: white for a docked device, blue for a paired Bluetooth device and amber for a
device connected to the Auxiliary input.
If you begin to stream audio from a paired Bluetooth device or play audio from a device
connected to the dock while another source is playing, the dock will automatically switch
to the new source.
Power button and LED: When the dock is on, press the Power button to put it into the
standby mode. The button’s LED will glow solid amber when the unit is in standby. When
the dock is in standby, press the Power button to turn it on. The button’s LED will glow
solid white when the unit is on.
When the dock is in the standby mode, it will automatically turn on when it detects audio
playing from a Bluetooth-connected device or from a docked device.
When the dock is on, it will automatically enter the standby mode after 10 minutes of
inactivity (no audio input and no user-control operation). The button’s LED will glow amber
when the dock is in standby.
Note: When the dock enters the standby mode, it will also bring a docked device into
standby mode.
Volume Up/Down buttons: Press these buttons to raise and lower the dock’s
volume. To mute the sound, press both buttons at the same time. (The Power button LED
will flash white when the sound is muted.) To restore the sound, press either Volume button
or both buttons together.
Dock Lid: Gently press down on the front edge of the dock lid to release it and reveal the
multi-pin Lightning docking connector. To close the dock, gently push the lid back in the
enclosure until it clicks.
English
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL OnBeat Rumble at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL OnBeat Rumble in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info