422468
34
Zoom out
Zoom in
Previous page
1/42
Next page
34
Project Everest DD66000 terminals are also designed to accept spade- or
banana-type connectors, which are fastened to the ends of the wires and, in
turn, are attached to the terminal posts.
Two sets of input terminals of Project Everest DD66000 are designed for use
with bi-wire and bi-amp connections. Read the following explanations and use
the suitable method.
I. Passive Connection Method
The passive method requires one amplifier and one set of wires. Connections
are made to either the upper terminals or the lower terminals. Do not remove
the shorting straps.
II. Bi-Wire Connection Method
The bi-wire connection method requires one amplifier and two sets of speaker
wires. By removing the shorting straps, connections may be made to the
individual network sections using four connectors, high-frequency wires to the
upper terminals and low-frequency wires to the lower terminals.
III. Bi-Amp Connection Method
The bi-amp connection method requires two amplifiers, one for the low-
frequency unit and one for the high-frequency unit, and a crossover network.
By removing the shorting straps, connections may be made in the following
way. Wires from the high-frequency amplifier are connected to the upper
terminals, and wires from the low-frequency amplifiers are connected to the
lower terminals.
Project Everest DD66000 is shipped with a twisted pair of shorting straps
installed. In case the bi-wire or bi-amp connection method is to be employed,
remove the straps from the terminals (referring to the figures below) and
retighten the terminals. If the amplifiers are connected to the Project Everest
DD66000 loudspeakers in the bi-wire or bi-amp mode with the shorting straps
still on, the amplifier outputs will be shorted, which could result in costly
amplifier damage when power is switched on.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL k2 s4800 kersen at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL k2 s4800 kersen in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info