810156
2
Zoom out
Zoom in
Previous page
1/2
Next page
PN: 5085238-A ISSUED: 05/2017
ENGLISHDEUTSCHE
DOWNLOAD THE OPERATION MANUAL
Get the operation manual at www.jblpro.com/intonato24.
Scan the QR code to the right using a mobile device to go to web
URL. Warranty information is available in the operation manual.
REGISTER PRODUCT
Register your product at http://www.jblpro.com/www/
support/product-registration/registration_register. Scan
the QR code to the left using a mobile device to go to web URL.
IMPORTANT! Read the safety instructions included in the box before installing
and operating this product.
3
CONNECT TO THE NETWORK
a. Ensure a DHCP server (such as a network router) is connected to the control
network. A DHCP server must be connected to the control network to assign
an IP address to the Intonato DC.
b. Ensure the Intonato 24 and the control device (computer, tablet, etc.) are
connected to the control network and that they have been assigned an IP
address by the DHCP server. To verify the Intonato 24 has been assigned an
IP address, look at the LCD screen on the back panel of the unit.
c. Connect the Intonato DC’s Ethernet port to a PoE-enabled port on the control
network. If a PoE (Power over Ethernet) port is not available, a PoE inline
power adapter that is 802.3af or 802.3at compliant can be used.
NOTE: It is recommended to use new, high-quality Ethernet cables when
connecting the Intonato DC to the control network to prevent accidental
disconnection from the power source and network.
d. Wait a couple of minutes for the Intonato DC to be assigned an IP address by
the DHCP server.
4
CONTROL AN INTONATO | 24 DEVICE
a. Launch the JBL Intonato control app.
b. Connect to the Intonato 24 device to control.
c. Select the Desktop Controller menu item from the Main User Menu.
d. Press the Connect button for the Intonato DC you are connecting for control.
e. Set the desired LED brightness using the Brightness dropdown menu:
1=dimmest, 4=brightest.
NOTE: If connecting multiple controllers to the network, the node IDs must be
unique for each. In the rare event that multiple controllers have been assigned the
same node ID, see the Intonato DC operation manual for information about changing
HiQnet® node IDs.
NOTE: To verify the Intonato DC is being assigned an IP address, disconnect then
reconnect power. While the unit is booting, press the Locate button with a small
pointed object (such as a paperclip or pin). Continue holding the button until the
menu appears in the display. Press the Network Status-Firmware Version
button. Verify an IP address has been assigned to the Intonato DC.
For additional information about network configuration and troubleshooting, see the
Intonato DC operation manual.
1
UNPACK
Open the box then verify and remove the following contents:
Intonato DC Desktop Controller
Safety Instructions
2
DOWNLOAD & INSTALL THE APP
Visit www.jblpro.com/intonato24 for the latest information on device
requirements for the JBL Intonato control app.
Download and install the JBL Intonato control app from the iTunes Store®, Google
Play™, or from www.jblpro.com/intonato24.
Quick Start Guide
INTONATO | DC
DESKTOP CONTROLLER
BEDIENUNGSANLEITUNG
HERUNTERLADEN
Sie finden die Bedienungsanleitung unter www.jblpro.com/
intonato24. Scannen Sie den QR-Code rechts mithilfe eines
Mobilgeräts ein, um zu der Web-URL zu gelangen. Informationen zur
Garantie finden Sie in der Bedienungsanleitung.
PRODUKT REGISTRIEREN
Registrieren Sie Ihr Produkt unter http://www.jblpro.com/www/
support/product-registration/registration_register.
Scannen Sie den QR-Code links mithilfe eines Mobilgeräts ein, um zu
der Web-URL zu gelangen.
WICHTIG! Lesen Sie die mitgelieferten Sicherheitshinweise, bevor
Sie das Produkt installieren und in Betrieb nehmen.
3
VERBINDUNG MIT DEM NETZWERK
HERSTELLEN
a. Stellen Sie sicher, dass ein DHCP-Server (wie z. B. ein Netzwerkrouter)
mit dem Steuernetzwerk verbunden ist. Ein DHCP-Server muss mit dem
Steuernetzwerk verbunden sein, damit dem Intonato DC eine IP-Adresse
zugewiesen werden kann.
b. Stellen Sie sicher, dass der Intonato 24 und das Steuergerät (Computer,
Tablet, etc.) mit dem Steuernetzwerk verbunden sind und dass ihnen durch
den DHCP-Server eine IP-Adresse zugewiesen wurde. Um zu überprüfen,
ob dem Intonato 24 eine IP-Adresse zugewiesen wurde, sehen Sie auf dem
LCD-Display auf der Rückenplatte des Geräts nach.
c. Verbinden Sie den Ethernetport des Intonato DC mit einem PoE-unterstützten
Port des Steuernetzwerks. Falls kein PoE-Port (Power over Ethernet) verfügbar
ist, kann ein PoE-Inline-Netzadapter, der 802.3af- oder 802.3at- konform ist,
verwendet werden.
HINWEIS: Es wird empfohlen, neue, hochwertige Ethernetkabel zu verwenden,
wenn Sie den Intonato DC mit den Steuernetzwerk verbinden, um versehentliche
Unterbrechungen von der Energiequelle und vom Netzwerk zu vermeiden.
d. Warten Sie ein paar Minuten, bis dem Intonato DC vom DHCP-Server eine
IP-Adresse zugewiesen wird.
4
STEUERUNG EINES
INTONATO | 24-GERÄTS
a. Starten Sie die JBL-Intonato-Steueranwendung.
b. Stellen Sie die Verbindung mit dem Intonato 24-Gerät her, um dieses zu steuern.
c. Wählen Sie den Menüpunkt Desktop Controller vom Hauptmenü aus.
d. Drücken Sie die Taste Connect [Verbinden] für den Intonato DC, mit dem Sie
eine Verbindung herstellen wollen, um diesen zu steuern.
e. Stellen Sie die gewünschte LED-Helligkeit mithilfe des Dropdownmenüs
Brightness [Helligkeit] ein: 1 = dunkelste Einstellung, 4 = hellste Einstellung
HINWEIS: Falls Sie mehrere Controller an das Netzwerk anschließen, muss jeder
Controller seine eigene Knoten-ID erhalten. Sollte der seltene Fall eintreten, dass mehreren
Controllern dieselbe Knoten-ID zugewiesen wurde, finden Sie in der Bedienungsanleitung
des Intonato DC Informationen zur Änderung der HiQnet®-Knoten-IDs.
HINWEIS: Um zu überprüfen, ob dem Intonato DC eine IP-Adresse zugewiesen
wurde, trennen Sie ihn vom Netz undstellen dann die Verbindung wieder her.
Während die Einheit hochfährt, drücken Sie die Taste Locate [Suchen] mit einem
kleinen spitzen Gegenstand (z. B. einer Büroklammer oder einer Reißzwecke). Halten
Sie die Taste gedrückt, bis dass auf dem Display das Menü erscheint. Drücken Sie
die Taste Network Status-Firmware Version [Netzwerkstatus - Firmwareversion].
Überprüfen Sie, ob dem Intonato DC eine IP-Adresse zugewiesen wurde.
Weitere Informationen zur Netzwerkkonfiguration und Fehlerbehebung finden Sie in
der Bedienungsanleitung des Intonato DC.
1
AUSPACKEN
Öffnen Sie die Verpackung, stellen Sie sicher, dass die folgenden Teile enthalten sind
und entnehmen Sie sie der Verpackung:
Intonato DC Desktop Controller
Sicherheitshinweise
2
DIE APP HERUNTERLADEN UND IN-
STALLIEREN
Besuchen Sie www.jblpro.com/intonato24, um die neuesten Informationen
zu den Geräteanforderungen für die JBL Intonato- Steueranwendung zu erhalten.
Nehmen Sie den Download und die Installation der JBL Intonato-Steueranwendung
vom iTunes Store®, Google Play™ oder www.jblpro.com/intonato24 vor.
Schnellstart Anleitung
INTONATO | DC
DESKTOP CONTROLLER
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL Intonato Desktop Controller at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL Intonato Desktop Controller in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 0.08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JBL Intonato Desktop Controller

JBL Intonato Desktop Controller User Manual - English - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info