810156
21
Zoom out
Zoom in
Previous page
1/30
Next page
Page 21
INTONATO DC Operation Manual
Networking
Networking
This section of the manual provides basic information on network settings, network security, and
network troubleshooting. It also covers the HiQnet NetSetter application, which is a PC-compatible
software application used to edit network settings for all connected HiQnet devices on a network from
one central location.
Networking Overview
Below is a brief description of the most common network settings.
IP Address
An IP address is an identifier for a computer or device on a TCP/IP network. Each device in a
network has its own IP address to identify it (e.g., 126.126.17.42). Networks using the TCP/IP
protocol route messages based on the IP address of the destination. An IP address is made of
four numbers separated by periods. Each number can be 0 (zero) to 255. The last number should
not be a 0 (zero) or 255. For example, 126.126.17.1 could be an IP address. 126.126.17.0 would
not be a valid IP address.
A TCP/IP or IP address has two parts: the Network ID and the Host ID. The Network ID identifies
the network, and the Host ID identifies either the subnet and device, or just the device if there is no
subnet. The subnet mask is a code that indicates which part of the TCP/IP address is the Network
ID and which part is the Host ID. In subnet-mask code, 255 identifies the part of the address
that is the Network ID. For example, suppose the IP address of a device is 192.168.xx.yy and
the subnet mask is 255.255.x.y. That means, “192.168” is the Network ID. The remaining set of
numbers (xx.yy) is the Host ID. If the network stands alone (it is not part of a larger network) then
the Host ID identifies each device in the network. If the network is part of a venue’s larger network,
the network is actually a sub-network or subnet.
Subnet
A subnet is a small network within a larger network. For example, a TCP/IP network in a single
area might be a subnet of a venue’s larger network, which could include computers throughout
the building. Or, a network might be divided into multiple subnets. For example, a large installation
may have one subnet per rack or room.
DHCP (Dynamic Host Configuration Protocol)
DHCP is a protocol for automatically assigning IP addresses to devices on a network. With
dynamic (DHCP) addressing, a device might have a different IP address every time it connects to
the network. DHCP relies on a DHCP server to assign and manage IP addresses. Most network
routers come equipped with a built-in DHCP server.
Gateway
A gateway is used to connect two different networks and allow packets to be passed between
them. In a typical home network, the router provides the “gateway” connection between the
local area network (LAN) and Internet (WAN) so they can communicate. A gateway can translate
between one network system or protocol and another.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL Intonato Desktop Controller at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL Intonato Desktop Controller in the language / languages: English as an attachment in your email.

The manual is 3.23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JBL Intonato Desktop Controller

JBL Intonato Desktop Controller Quick start guide - English, German, French, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info