For 3-channel operation connect the stereo speakers to the Front terminals as described above. Connect the single speaker’s + lead to the Rear L+ terminal,
and the - lead to the Rear R- terminal.
For 2-channel (bridged) operation connect one speaker’s + lead to the Front L+ terminal, and the - lead to the Front R- terminal. Connect the other
speaker’s + lead to the Rear L+ terminal, and the - lead to the Rear R- terminal.
• The GTR-7535 features Front L+, L-, R+, and R- terminals; Rear L+, L-, R+, and R- terminals; and Sub + and - terminals.
◆ For 5-channel operation connect the front left speaker to the Front L+ and L- terminals, and the front right speaker to the Front R+ and R- terminals.
Connect the rear left speaker to the Rear L+ and L- terminals, and the rear right speaker to the Rear R+ and R- terminals. Connect the subwoofer’s
positive (+) lead to the + terminal, and the negative (-) lead to the - terminal.
• The GTR-601 and GTR-1001 feature two positive (+) and two negative (-) terminals.
◆ To power two subwoofers, connect one sub’s positive (+) and negative (-) leads to the positive and negative terminals on the left, and the other sub’s
positive and negative leads to the positive and negative terminals on the right. The terminals are internally paralleled.
◆If you are connecting only one sub, you can use either set of positive and negative terminals.
• NOTE: Minimum speaker impedance for stereo full-range and subwoofer operation is 2ohms. Minimum speaker impedance for bridged operation is
4ohms.
2. Fuses:
Replace only with fuses of the same amperage.
• For the GTR-102, GTR-104, and GTR-7535 use 30 Amp
• For the GTR-601, GTR-1001 use 35 Amp
3. Power Input Connectors:
• Power: Run power wire from the +12V input to the positive terminal of the vehicle’s battery. Install an appropriate fuse holder and fuse (60A minimum)
within 18" (457mm) of the battery. Make sure the wire is not damaged or pinched during installation. Install protective grommets when routing wires
through the bulkhead or other sheet metal. Use larger-gauge wiring for longer runs.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for JBL GTR-601 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of JBL GTR-601 in the language / languages: English as an attachment in your email.
The manual is 1,42 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
