Connect an 18awg wire from the Remote Out lead of the source unit to the included connector, and then plug the connector into this input (see illustration
below). The REM lead detects signal and instructs the amplifier to turn on/off.
GTR remote lead connector
In addition to REM inputs that turn on the amp, there are REM outputs that can be used to turn on other amps. If the amp auto turns on when detecting a
Bluetooth signal or ADAS input, its REM outputs will turn on the other amps as well.
Micro USB input for connecting to a computer for firmware updates, if required. Current software version can be checked by pressing and holding the Phone
End button on remote controller for at least 10 seconds (see 20. Phone End button below). Upgrade mode can be entered by pressing and holding the Clari-Fi
button on remote controller for at least 10 seconds, until all four indicator lights flash for one second (see 28. Clari-Fi button below).
15. Power/Protect indicator:
The light will illuminate in white when the amp is receiving power and playing. The indicator will turn red if the amp enters Protect mode in the event of
conditions such as over/under voltage, short circuit, amplifier output circuit failure, excessive heat, and shut itself down. (Find indicator located on top panel
The light will illuminate when Clari-Fi has been engaged is applying sound restoration technology to all signals passing through the amp, wired or wirelessly.
17. Party Mode indicator (GTR-102, GTR-104, GTR-7535):
The light will illuminate when Party Mode has been engaged (see 25. Party Mode button on remote controller) and multiple paired devices are able to stream
music wirelessly to the amp over Bluetooth.
18. Bluetooth
®
indicator (GTR-102, GTR-104, GTR-7535):
The light will illuminate when Bluetooth is active and the amp is paired with a compatible device (see 27. Bluetooth Pairing button).
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for JBL GTR-102 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of JBL GTR-102 in the language / languages: English as an attachment in your email.
The manual is 1,42 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
