422793

JBL everest dd66000 maple Manual

23
Zoom out
Zoom in
Previous page
1/42
Next page
Project Everest DD66000
23
CHAPTER 5
Amplifier Recommendations
No single type of amplifier is specified for use with the Project Everest
DD66000 system. The speakers are highly efficient and will operate adequately
with an amplifier or receiver of 70–100 watts.
However, the transient response and audio definition of a high-end system such
as Project Everest DD66000 will pick up all the inefficiencies and distortion in an
amplifier system. For full-range operation, the Project Everest DD66000 system
should not be used with an amplifier/receiver of less than 100 watts. High-quality
amplifiers/receivers of 100–500 watts will ensure optimal system performance.
There is no effective limit to the power handling capabilities of the Project
Everest DD66000 loudspeakers when driven by consumer audio amplifiers.
No damage will occur when used with high-powered components. Source
impedance is an important criterion in selecting an appropriate unit; the
selected amplifier(s) should have a very high current capacity and must be
capable of driving a low-impedance load.
For bi-wiring or bi-amplification applications, four identical amplifiers or two
dual-channel units may be used, although specialized low-frequency and high-
frequency amplifiers offer clear advantages. (If four amplifier channels are
used, the high-frequency amplifier may be up to 6dB less powerful than the
low-frequency amplifier. Due to the power-versus-frequency distribution of the
music, the low-frequency section requires approximately four times the power
of the high-frequency section.)
Project Everest DD66000 dealers can recommend amplification to best suit
individual needs. In all cases, the left and right amplifiers for each section must
be identical. Make sure that the input sensitivity of the two amplifiers is equal
or that input level controls are provided to maintain the proper low to mid/high
balance. If two identical stereo amplifiers are chosen, each amplifier may be
located near a loudspeaker and drive low-frequency and high-frequency
sections through short wire runs.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL everest dd66000 maple at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL everest dd66000 maple in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info