810149
19
Zoom out
Zoom in
Previous page
1/28
Next page
19
“HPF on this Speaker” can be used to remove signal below a selected frequency to the built-in amp/speaker
and tweeter bar.
“LFP on Pass Thru Out” can be used to set the low pass lter on the Thru Out XLR output feed.
Time Align
Signal delays are used when multiple speakers are in use but speakers are at different distances from the
audience.
Examples:
A subwoofer is front of the stage, while this full range speaker in on the stage. In this conguration, the
Pass Thru XLR to subwoofer will need to be slightly delayed to make up for its closer position to the
audience.
The Pass Thru XLR out is feeding an additional full range speaker placed half way back in the
audience, to give additional listening distance. In this case, delay the back ll speaker in the audience
to compensate correct time alignment.
Time Alignment Basics:
To compensate for different distances, determine the speaker farthest from the audience and delay
other speakers with the same signal to “time align” with the speaker farthest away from the audience.
Sound travels through air at average humidity and room temperature at about 1.1 feet per ms. Measure
the difference in distance of each speaker feeding the audience. Feed the speaker farthest from the
audience with no time alignment delay. Set delays for the other closer speakers based on their distance
ahead of the farthest back speaker. Measure the distance difference and enter 1 ms per 1.1 feet that
each speaker is ahead of the farthest back speaker in your conguration. Time alignment is not perfect
as not all audience positions measure the same speaker distance differences.
“Delay Pass Thru Out” Enter in ms.
“Delay This Speaker” Enter in ms.
Settings
“BT Audio Pairing” enables Bluetooth audio pairing for up to 30 seconds. This setting turns off when a pairing has
been made, or after 30 seconds.
“BT Control Pairing” enables Bluetooth control pairing for up to 30 seconds with the JBL Pro Control app. This
turns off when a pairing has been made, or after 30 seconds.
The EON700 loudspeaker will conrm a secure pin with the app. Please ensure you conrm this to secure BLE
control pairing.
“LCD Contrast” allows the user to adjust the LCD contrast between 0 and 100%.
“Firmware Version” shows the current rmware version loaded onto the speaker.
“Factory Reset” resets all settings in the speaker to factory default, including Bluetooth communication pairing.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL EON718S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL EON718S in the language / languages: English as an attachment in your email.

The manual is 3.24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info