650515

JBL CristalProfi e401 Manual

26
Zoom out
Zoom in
Previous page
1/201
Next page
22
water level is low (e.g. in a turtle tank).
Connect the water outlet pipe, angle piece and spray bar (if required) and secure them in
the aquarium with suction cups. First, remove the end cap of the spray bar and only replace
it when the filter is operating.
Tip: We advise against using the spray bar in aquariums containing plants, as too much of the
vital plant nutrient, CO2, is expelled from the water. The best results are achieved by using
the water outlet pipe with an angle piece or a wide jet pipe with the outlet just below the
surface of the water to produce moderate surface agitation. The distance between the outlet
and the surface of the water can be individually set by using the two extension pieces.
Connect the hose with the suction pipe from the “IN” position on the hose connection block
(black elbow connection) and the hose with the water outlet pipe from the “OUT” position
(grey elbow connection). Firmly attach the hoses by turning the nuts anticlockwise until
they are tight.
Cut the hoses as short as possible to avoid kinking. This also makes priming easier.
5
Starting up
Make sure that the two small stopcock levers on the pump head are in the “OPEN” position.
During the following start up procedure, the water outlet pipe with the spray bar, etc.
must be positioned ABOVE the surface of the water for optimum ventilation of the
appliance.
Press the “START” button on the pump head repeatedly with the palm of your hand until wa-
ter begins to flow into the suction hose (hose on “IN” ). . Wait until the filter has completely
filled with water and the water in the hose leading to the water outlet pipe (hose on “OUT”)
is at the same level as the surface of the water in the aquarium.
Connect the filter to the mains power supply. The water will now flow out of the water outlet
pipe into the aquarium. At first, it may be mixed with air that is still trapped between the
layers of the filter media. Gently shake the filter to dislodge the air which will escape with
the stream of water.
Please note: If you replace an existing aquarium filter with a JBL CristalProfi external filter,
we recommend running both the new filter and the old filter parallel in the same aquarium
for the first 2 weeks, before dismantling the “old” filter. This ensures that the new filter has
a sufficiently large colony of cleansing bacteria and avoids harmful nitrites occurring in the
transitional phase.
Check that all parts are watertight.
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL CristalProfi e401 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL CristalProfi e401 in the language / languages: All languages as an attachment in your email.

The manual is 6,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info