648489
11
Zoom out
Zoom in
Previous page
1/16
Next page
JBL CLUB
8
9. Input level selectors (GAIN):
Input level controls. Use these to match the amp’s input sensitivity to the output level of your source unit. See 17 for a recommended adjustment procedure.
(See Setting the input levels in Chapter 3 for a recommended adjustment procedure.)
10. Crossover-filter frequency controls (FREQ):
Crossover-filter frequency controls. Turn the dials to the left to lower the crossover point, and to the right to raise the crossover point. Crossover
point settings vary by listener preference.
11. HALOsonic:
Lets you plug in an optional cable into your vehicle’s HALOsonic system (if present).
Also functions as a full-range mixing input.
7. Input level:
Use this switch along with the gain control to set the Club amplifier’s input level. If use an aftermarket radio’s RCA-level outputs, set the Input
Level switch to the “LO” position. If using high-level outputs, start the control-setting process with the Input Level switch set in the “HI1” position.
Note: If you have connected your Club amplifier to a factory audio system’s speaker outputs, the audio signal may fail to play. If this happens,
change the Input Level switch to the “HI2” position. The “HI2” position includes a circuit designed to fool this type of factory audio system into
“seeing” a speaker connected to its input.
Important: The “HI2” setting should never be used when the Club amplifier is connected to an aftermarket head unit’s line-level (RCA-type)
outputs.
8. Crossover filter selectors (X-OVER):
Crossover-filter selectors (Club-704 and Club-4505 only; Club-5501 filter is low pass only).
LP: Low pass. Choose this setting if you’re connecting a subwoofer(s), or want to provide a low-pass filter for separate mid-bass speakers.
FULL: Full range. Choose this setting if you’re connecting full-range speakers, and not using a subwoofer in your system.
HP: High pass. Choose this setting to prevent low bass from reaching midrange or full-range speakers when you’re using a subwoofer in your system.
(See setting the crossovers in Chapter 3.)
PRE OUT
REAR FRONT
From high-level
source
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL Club-5501 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL Club-5501 in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info