809536

JBL CINEMA SOUND CSS10 Manual

6
Zoom out
Zoom in
Previous page
1/12
Next page
6
CONNECTION TIPS
SPEAKER CONNECTIONS
Separate and strip the
ends of the speaker wire
as shown. Speakers and
electronics terminals have
corresponding (+) and (–)
terminals. Most manufacturers
of speakers and electronics,
including JBL, use red to
denote the (+) terminal and
black to denote the (–)
terminal.
The (+) lead of the speaker
wire is noted with a stripe.
It is important to connect
both speakers identically:
(+) on the speaker to (+) on
the amplifier and (–) on the
speaker to (–) on the amplifier.
Wiring “out of phase”results
in thin sound, weak bass and
apoor stereo image.
With the advent of multi-
channel surround sound
systems, connecting all of
the speakers in your system
with the correct polarity
remains equally important in
order to preserve the proper
ambience and directionality
of the program material.
CST55
To provide a neater installa-
tion, the CST55 allows you
to insert the speaker wires
through holes in the base.
Simply separate and strip
the wires as described
above, loosen the terminals
and insert each wire into its
corresponding hole in the
base. Then tighten down
the terminals.
The hole in the center
of each collar is intended
for use with banana-type
connectors. To comply with
European CE certification,
these holes are blocked
with plastic inserts at the
point of manufacture. To
use banana-type connectors
requires the removal of the
inserts.
CSB5, CSC55
To use the binding-post
speaker terminals, unscrew
the colored collar until the
pass-through hole in the
center post is visible under
the collar. Insert the bare
end of the wire through this
hole; then screw the collar
down until the connection is
tight. The hole in the center
of each collar is intended
for use with banana-type
connectors. To comply with
European CE certification,
these holes are blocked
with plastic inserts at the
point of manufacture. To
use banana-type connectors
requires the removal of the
inserts.
CS OM 6/5/06 11:43 AM Page 6
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL CINEMA SOUND CSS10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL CINEMA SOUND CSS10 in the language / languages: English as an attachment in your email.

The manual is 0.9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info