507342
3
Zoom out
Zoom in
Previous page
1/10
Next page
www.jbl.com
English
3
Bluetooth button (soundbar only): Press this button to play the
audio stream from a paired Bluetooth device through the soundbar. (The
Bluetooth Source Indicator LED will illuminate when a paired Bluetooth
device is the active source.) Press and hold this button to force the
soundbar into the Bluetooth pairing mode. See Bluetooth Operation, on
page 7, for more information.
Bass Boost button (remote control only): Press the remote’s
Bass Boost button to enhance low-frequency performance. Pressing
the Bass Boost button again will return the soundbar’s normal low-
frequency performance.
SuBWooFEr CoNTroLS ANd CoNNECTIoNS
Subwoofer Level control: Use this control to balance the subwoofer’s
volume with that of the soundbar. Turn the knob clockwise to increase
the subwoofer’s volume; turn it counterclockwise to decrease the
subwoofer’s volume.
Crossover control: This knob adjusts the subwoofer’s cutoff between
40Hz and 200Hz.The higher you set the Cutoff control, the higher
in frequency the subwoofer will operate and the more its bass will
“overlap” that of the soundbar. This adjustment helps achieve a smooth
transition of bass frequencies between the subwoofer and the soundbar
for a variety of different rooms and subwoofer locations. See Subwoofer
Crossover control, on page 8, for more information.
Phase switch: This switch determines whether the subwoofer driver’s
piston-like action moves in and out in phase with the speakers in the
soundbar. If the subwoofer were to play out of phase with the soundbar
speakers, some of the sound waves produced by the subwoofer or
soundbar could be canceled, reducing bass performance and sonic
impact. This phenomenon depends in part on the relative placement of
the speakers in the room. See Subwoofer Phase switch, on page 8, for
more information.
Wireless Pairing switch and LED: Press this switch to initiate
wireless pairing between the subwoofer and the soundbar. See Pairing
the Units for Wireless Operation, on page 6, for more information.
The LED lights blue continuously when the subwoofer is on and
linked to the soundbar.
The LED slowly flashes blue when the subwoofer is on and the
wireless link is not established between the subwoofer and the
soundbar.
The LED rapidly flashes blue during the wireless pairing process.
Power switch: Set this switch to the “On” position to activate the
subwoofer. In normal operation, this switch will be left in the “On”
position. See Turning the Subwoofer On and Off, on page 6, for more
information.
If you will not be using the subwoofer for an extended period – for
instance, if you’re going on vacation – set the Power switch to the “Off”
position.
Power Cord connector: Connect the included power cord here and
into an active, unswitched AC outlet. See Power Connections, on page
5, for more information.
IMPORTANT: Do not connect the power cord to an AC outlet until
you have made and verified all other connections.
Power
Switch
Subwoofer Level
Control
Crossover
Control
Phase
Switch
Wireless Pairing
Button
Wireless Pairing
LED
Power Cord
Connector
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL CINEMA SB400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL CINEMA SB400 in the language / languages: English as an attachment in your email.

The manual is 3,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JBL CINEMA SB400

JBL CINEMA SB400 User Manual - German - 10 pages

JBL CINEMA SB400 Quick start guide - Dutch - 10 pages

JBL CINEMA SB400 User Manual - French - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info