648472
10
Zoom out
Zoom in
Previous page
1/12
Next page
10
SUBWOOFER CROSSOVER CONTROL
The subwoofer’s Crossover control adjusts the subwoofer’s cutoff
between 40Hz and 200Hz. The higher you set the Crossover
control, the higher in frequency the subwoofer will operate and the
more its bass will “overlap” that of the soundbar. This adjustment
helps achieve a smooth transition of bass frequencies between the
subwoofer and the soundbar for a variety of different rooms and
subwoofer locations. To set the Crossover control, listen for the
smoothness of the bass. If the bass seems too strong at certain
frequencies, try a lower Crossover control setting. If the bass
seems too weak at certain frequencies, try a higher Crossover
control setting.
CROSSOVER
SUBWOOFER PHASE SWITCH
This switch determines whether the subwoofer’s piston-like action
moves in and out in phase with the speakers in the soundbar.
If the subwoofer were to play out of phase with the soundbar
speakers, some of the sound waves produced by the soundbar
and subwoofer could be canceled out at some frequencies,
reducing bass performance and sonic impact. This phenomenon
depends in part on the relative placement of the soundbar and
subwoofer in the room. Although there is no absolutely correct
setting for the Phase switch, in most cases it should be left in
the “0°” position. When the subwoofer is properly in phase with
the soundbar speakers, the sound will be clearer and have more
impact. It will make percussive sounds like drums, piano and
plucked strings sound more lifelike. The best way to set the Phase
switch is to listen to music that you are familiar with and adjust the
switch so that drums and other percussive sounds have maximum
impact.
PHASE
USING YOUR OWN TV REMOTE (TV REMOTE
CONTROL LEARNING)
If you are using an HDMI ARC connection to your television, then
your TV remote control will automatically operate the soundbar
for standard commands such as power on/off and volume
control. The JBL CINEMA SB450 supports HDMI CEC and will
interoperate with compatible TV’s (check your TV owner’s manual
for HDMI CEC compatibility)
If your TV does not support HDMI CEC volume and power control
another option is to program the soundbar to be controlled by
your TV remote control. For example, when you press POWER
ON, you will turn on your TV and soundbar at the same time. This
simplifies your system helps you keep your TV and speaker in
sync.
Press and Hold Until
Button Flashes Amber
TV
Remote
30cm
(12")
1. Confirm that soundbar is ON
2. Press and hold the top-panel Harman Display Surround
Button for 5 seconds until the power LED flashes amber. If the
LED does not flash, release the button and try again.
3. Press the soundbar top-panel VOLUME UP button
4. Aim the TV remote at the front of the JBL Cinema SB450 and
slowly press the VOLUME UP button on the TV remote until
the Harman Display Surround button flashes white for one
second. This indicates that the programming operation has
been successful.
5. Repeat steps 3 and 4 for VOLUME DOWN, POWER, and
MUTE (to mute the JBL Cinema SB450, press VOLUME UP
and VOLUME DOWN buttons at the same time).
6. To exit the learning mode (at any time or when the learning
is complete), press and hold the Harman Display Surround
button until the amber LED stops flashing.
RESETING THE SOUNDBAR
The JBL Cinema SB450 can be reset to its default factory settings
and erasing all programming.
To reset the soundbar, press and hold Volume+ and Virtual
Surround buttons for 5s.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL Cinema SB 450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL Cinema SB 450 in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info