810187
16
Zoom out
Zoom in
Previous page
1/72
Next page
15
DCR600 Front Panel Information Display
ABitstream Indicators: When the input is
a digital source, these indicators display the
specific type of data signal.
BOptical Source: Indicates an Optical
Digital Input has been selected.
CDTS: Indicates a DTS-encoded source.
DDolby Digital: Indicates a Dolby Digital
source.
ECoaxial Source: Indicates a Coaxial
Digital Input.
FDolby Pro Logic: Indicates the Dolby
Pro Logic mode has been selected.
GAnalog Input: Indicates an analog input
source.
NOTE: Analog audio input is not available
when the DVD input is in use.
HDolby 3 Stereo Indicator: This indicator
lights when the Dolby 3 Stereo Mode has been
selected.
IVMAx Mode: Lights when the VMAx
mode is in use.
VMAx F
appears when the
Far Field VMAx mode is selected; VMAx N
appears when the Near Field VMAx mode is
selected.
J5-Channel Stereo: Lights when the 5-
Channel Stereo mode has been selected.
KLogic 7 Mode: Indicates that the Logic 7
mode is in use. LOGIC 7C appears for the
Cinema version of Logic 7; LOGIC 7M
appears for the Music version of Logic 7.
LHall Mode: Lights when the Hall mode
has been selected.
MTheater Mode: Indicates that the Theater
mode has been selected.
NNight Mode: Indicates that the DCR600
is in the Night mode, which preserves the
dynamic range of digital program material
at low volume levels.
OSpeaker/Channel Input: These indicators
are multipurpose, indicating either the speaker
type selected for each channel or the incoming
data-signal configuration. The left, center,
right, right surround and left surround speaker
indicators are composed of three boxes, while
the subwoofer is a single box. The center box
lights when a “Small” speaker is selected, and
all three boxes light when “Large” speakers
are selected. When none of the boxes are lit
for the center, surround or subwoofer channels,
no speaker has been selected for one of those
positions. The letters inside each of the center
boxes display active input channels. For stan-
dard analog inputs, only the L and R will light,
indicating a stereo input. When a digital
source is playing, the indicators will light to
display the channels being received at the digi-
tal input. When the letters flash, the digital
input has been interrupted.
PPreset Number/Sleep Timer: In Tuner
mode these numbers indicate the preset mem-
ory location in use. In Sleep function mode it
shows the number of minutes remaining before
the unit goes into the Standby mode.
QPreset Indicator: This indicator lights
when the tuner is in use to show that the
Preset Number/Sleep Timer Pis showing
the station’s preset memory number.
RSleep Indicator: This indicator lights
when the Sleep function is in use.
S
Memory: Flashes when entering presets
and other information into the tuner’s memory.
TStereo: Lights when an FM station is
being tuned in stereo.
UTuned: Lights when a station is being
received with sufficient signal strength to pro-
vide acceptable listening quality.
VAuto: Lights when the tuner is in Auto
mode.
WMain Information Display: Shows mes-
sages relating to the status, input source, sur-
round mode, tuner, volume level or other
aspects of operation.
XMute: Lights to indicate that the unit has
been put in Mute by pressing the Mute
Button c. Press the Mute button again to
return to the previously selected output level.
COAXIAL
THEATER
5 CH STEREO HALL
3
-
STEREO
PRO LOGIC
DIGITAL
DTS
DOLBY D
PCM
MP3
NIGHT
OPTICAL ANALOG LFE
0
CL
0
1 2 123
MEMORY PRESET
SLEEP
AUTO
5.1 LOGIC 7 CM
VMAx NF
MUTE TUNED ST
A
B
DEN
O
KM
L
S
TRQP
XWVU
FHIJ
O
O
R
O
O
LS
O
O
RS
O
O
CG
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL Cinema ProPack 600 System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL Cinema ProPack 600 System in the language / languages: English as an attachment in your email.

The manual is 1.3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info