810186

JBL Cinema BD300 Manual

20
Zoom out
Zoom in
Previous page
1/31
Next page
20
ADJUSTING INDIVIDUAL SPEAKER VOLUMES
You can adjust the volumes of the system’s individual speakers while you’re
listening to audio playback sources.
1. Press the Setup button and use the Cursor Right button to select Audio
Settings.
Audio Output
Speaker Settings
Test Tone More ...
Audio Settings
2. Use the Cursor Down button to select “Speaker Settings” and then
press Cursor Right to select “Test Tone” and again to select “More.”
Audio Output
Speaker Settings
Audio Settings
SUB
L
LS RS
R
C
3. The BD receiver will now output test noise through each of the
loudspeakers in the following order: Left (L), Center (C), Right (R), Right
Surround (RS), Left Surround (LS) and Subwoofer (SUB).
4. Press Enter when the loudspeaker you want to adjust is highlighted. The
Level/Distance selections will appear.
Audio Output
Speaker Settings
Audio Settings
L
LS RS
R
C
Level
Distance
5. Press Enter to adjust the level of the speaker.
Audio Output
Speaker Settings
Audio Settings
L
LS RS
R
C
L
R
10
10
6. Use the Cursor Left and Cursor Right buttons to change the speaker’s
volume level.
7. Press Enter to store the modied settings in the BD receiver’s memory;
press Clear/Exit twice to return to the previous screen and select
another speaker channel.
8. Press Setup or Home to exit from the Level Setup screens.
Notes on Setting Speaker Volumes in 5.1-Channel Systems:
While setting your system’s individual speaker volume levels is ultimately up
to your personal taste, here are some ideas you may nd helpful:
• For lms and video-music programs, your overall goal should be to
create an enveloping, realistic sound eld that draws you into the lm or
music program without drawing your attention away from the action on
the screen.
• For multichannel music recordings, some music producers will create a
sound eld that places the musicians all around you; others will create
a sound eld that places the musicians in front of you, with more subtle
ambience in the surround speakers (as you would experience in a
concert hall).
• In most 5.1-channel lms, the surround channels are not intended to
be as loud or as active as the front channels. Adjusting the surround
speakers so they are always as loud as the front channels could make
dialogue difcult to understand and will make some sound effects
sound unrealistically loud.
Notes on Setting Subwoofer Volume:
• Sometimes the ideal subwoofer volume setting for music is too loud for
lms, while the ideal setting for lms is too quiet for music. When setting
the subwoofer volume, listen to both music and lms with strong bass
content, and nd a “middle ground” volume level that works for both.
• If your subwoofer always seems too loud or too quiet, you may want
to place it in a different location. Placing the subwoofer in a corner will
always tend to increase its bass output, while placing it away from any
walls or corners will always tend to lessen its bass output.
IMPORTANT: Do not turn the receiver’s volume up to or past the
point where the audio from the speakers becomes distorted.
Doing so can damage the speakers.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL Cinema BD300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL Cinema BD300 in the language / languages: English as an attachment in your email.

The manual is 7.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info