810185
14
Zoom out
Zoom in
Previous page
1/31
Next page
14
CONNECTING THE AC POWER
The receiver comes with a detachable AC power cord. This type of cord
makes it easier for you to install and connect all other system wiring to the
receiver’s rear panel.
NOTES:
The power requirement for the BD100 and BD300 receivers is 100V –
240V AC, 50/60Hz, 50W. Connecting to a power source other than the
one listed may damage the receiver or cause abnormal operation.
• Before connecting the AC power cord to a wall outlet, conrm that you
have correctly made all of the speaker connections, video connections
and audio-component connections.
Connect the female end of the receiver’s detachable power cord to
the receiver’s AC Power connector. Plug the other end into a working,
unswitched AC outlet.
Power Cord
(supplied)
100V – 240V
50/60Hz
BD300 only: Plug the subwoofer’s power cord into an active, unswitched
AC wall outlet.
• If you set the subwoofer’s Auto/On switch in the “Auto” position, the
subwoofer will automatically turn on when it senses an audio signal at
its input connection. The subwoofer will automatically enter the Standby
mode approximately 20 minutes after the input signal ceases.
• If you set the Auto/On switch in the “On” position, the subwoofer will
turn on when the Power switch is in the “On” position and will turn off
when the Power switch is in the “Off” position.
If you will not be using the subwoofer for an extended period of time, such
as a vacation, we recommend setting the Power switch to “Off.”
Press the receiver’s front-panel Power button or the Power button on the
remote control. The front-panel information display will display the legend
“JBL.” The receiver is now ready for use.
pRepaRing The ReMoTe ConTRol
INSTALLING THE BATTERIES
Your receivers remote control uses AAA batteries (supplied). Insert the
batteries as shown in the illustration, making sure to observe the correct
polarity.
USING THE REMOTE
When using the remote, remember to aim it toward the receiver’s front
panel. Make sure that no objects, such as furniture, block the remote’s view
of the receiver. Bright lights, uorescent lights and plasma-video displays
may interfere with the function of the remote.
• The remote has a range of about 20 feet (6.1m), depending on the
lighting conditions.
You can use the remote at an angle of up to 30° to either side of the BD
receiver.
If the remote seems to operate intermittently, make sure that the batteries
are inserted correctly. If the remote still operates intermittently, replace both
batteries with new ones.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL Cinema BD100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL Cinema BD100 in the language / languages: English as an attachment in your email.

The manual is 7.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info