810185
10
Zoom out
Zoom in
Previous page
1/31
Next page
10
ConneCTions
NOTE: Connections for the Cinema BD100 and Cinema BD300 are
identical except where noted.
CONNECT THE SPEAKERS: BD100
CAUTION: Before making any connections to the BD100 receiver,
ensure that the receiver’s AC cord is unplugged from the receiver
and the AC outlet. Making speaker connections with the receiver
plugged in and turned on could damage your speakers.
Your Cinema BD100 receiver has color-coded speaker connectors and the
Cinema BD100 speaker wires are color-coded to make it easy to connect
the speakers properly.
white front left (+)
red front right (+)
blue surround left (+)
gray surround right (+)
green center (+)
purple subwoofer (+)
black (–) on all speakers
Connect the speaker’s wire with the colored band to the receiver’s speaker
terminal with the same color. Connect the speaker’s black wire to the black
receiver speaker terminal directly under the colored terminal. Wiring one
or more speakers incorrectly results in thin sound, weak bass and poor
surround-sound envelopment.
AUX IN
COAXIAL IN
VIDEO OUT
AC INPUT
100–240v—50/60Hz 50W
RADIO ANTENNA
FM 75W
NETWORK
OPTICAL IN HDMI OUT
FRONT R
CENTER
FRONT L
SURR R SURR L
FRONT R
Speaker
Red Band
to Red Tab
White Band
to White Tab
Green Band
to Green Tab
Gray Band
to Gray Tab
Blue Band
to Blue Tab
Purple Band to Purple Tab
SURR L
Speaker
SURR R
Speaker
FRONT L
Speaker SUBWOOFER
CENTER
Speaker
IMPORTANT: Make sure the (+) and (–) bare wires do not touch each
other or any metal object on the receiver’s rear panel. Touching
wires can cause a short circuit that can damage the BD100 receiver.
CONNECT THE SPEAKERS: BD300
CAUTION: Before making any connections to the BD300 receiver,
ensure that the receiver’s AC cord is unplugged from the receiver
and the AC outlet. Making speaker connections with the receiver
plugged in and turned on could damage your speakers.
Your Cinema BD300 receiver has color-coded speaker connectors. Press
the tab to open the connector, insert the bare wire into the opening and
release the tab to secure the wire.
white front left (+)
red front right (+)
blue surround left (+)
gray surround right (+)
green center (+)
black (–) on all channels
The BD300 system’s speakers use red to denote the ( + ) terminal and
black for the ( – ) terminal. Be sure to connect all the speakers identically:
red ( + ) on the speaker to the colored ( + ) terminal on the receiver and
black ( – ) on the speaker to the black ( – ) terminal on the receiver. Wiring
one or more speakers incorrectly results in thin sound, weak bass and poor
surround-sound envelopment.
FRONT R
Speaker
Gray Stripe to
Red Terminal
Gray Stripe to
White Terminal
Connect Wires
with Gray
Stripes to
Red Terminals
Gray Stripe to
Green Terminal
Gray Stripe to
Blue Terminal
Gray Stripe to
Gray Terminal SURR L
Speaker
SURR R
Speaker
FRONT L
Speaker
CENTER
Speaker
IMPORTANT: Make sure the (+) and (–) bare wires do not touch
each other or any metal object on the receiver’s rear panel.
Touching wires can cause a short circuit that can damage the
BD300 receiver.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL Cinema BD100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL Cinema BD100 in the language / languages: English as an attachment in your email.

The manual is 7.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info