810185
7
Zoom out
Zoom in
Previous page
1/31
Next page
7
www.jbl.com
English
NOTE: See the Connections section, on page 10, for detailed information
about making connections.
Fan vents: These vents are used by the receiver’s fan to cool the unit.
Maintain a clearance of at least three inches (75mm) from the nearest
surface to avoid overheating the unit.
IMPORTANT NOTE: Never block the fan vents. Doing so could
allow the receiver to overheat to dangerous levels.
Speaker connectors: Use the speaker wires supplied with the speakers
to connect the speakers to the proper terminals.
BD100 receivers have connections for six speakers: front left, front right,
surround left, surround right, center and subwoofer.
• BD300 receivers have connections for ve speakers: front left, front
right, surround left, surround right and center. (The receiver also has a
line-level output for the system’s powered subwoofer.)
See Connections, on page 10, for more information.
Coaxial Digital Input connector: Connect the coaxial digital output of
an audio-only source component here. The signal may be a Dolby® Digital
bitstream, a DTS® bitstream or a standard PCM digital-audio bitstream.
NOTE: Use only one type of digital connection for each source component.
Subwoofer Output connector (BD300 receiver only): Use the
supplied subwoofer LFE cable to connect this jack to the included powered
subwoofer’s LFE jack. See Connecting the Powered Subwoofer, on page
11, for more details about making connections.
Analog Audio Input connectors: Use these connectors to connect
to an audio-only source device (such as a tape deck). Do not connect a
turntable to these connectors without a phono preamp.
FM Antenna connector: Connect the supplied FM antenna to this
terminal.
Optical Digital Input connectors: Connect the optical digital output of
an audio-only source component here. The signal may be a Dolby Digital
bitstream, a DTS bitstream or a standard PCM digital-audio bitstream.
NOTE: Use only one type of digital connection for each source component.
Network connector: Use a Cat. 5 or Cat. 5E Ethernet cable (not
supplied) to connect the receiver’s Network connector to your home
network to enjoy streaming content and content from DLNA®-compatible
devices that are joined to the network. See Connecting to Your Home
Network, on page 13, for more information.
USB Network port (BD300 receiver only): If your home network
is a Wi-Fi® network, insert the supplied Wireless LAN/USB adapter into
this port. See Connecting to Your Home Network, on page 13, for more
information.
Do not insert a USB memory stick or similar device into the rear-panel
USB Network port. The port will work only with a USB network adapter
like the one supplied with the receiver.
HDMI® Monitor Out connector: Connect the BD receiver’s HDMI
output to your TV’s HDMI input. Since the HDMI cable transmits both
video and audio to the TV, we recommend that you set the receiver’s HDMI
audio output to Off in the receiver’s Audio menu to take full advantage
of your home theater system’s superior audio performance. If your TV is
3D-capable, you can watch 3D content in 3D either from the receiver’s built-
in disc player or from other 3D-capable source devices connected to the
receiver’s HDMI Input connectors (BD300 receiver only, see below).
The receiver’s HDMI Monitor Out connection also contains an Audio
Return Channel that carries a digital audio signal from your TV or video
display back to the receiver. It allows you to listen to HDMI devices that
are connected directly to your TV (such as an Internet connection) without
making an additional connection from the device to the receiver. Note: You
must enable your TV’s Audio Return Channel output. Consult your TV’s
instruction manual for information.
HDMI Input connectors (BD300 receiver only): You can connect
up to two additional source devices that have HDMI connectors to the
BD300 receiver. The HDMI connection transmits digital audio and video
signals between devices, so you do not have to make any additional audio
connections for these devices. The receiver will pass 3D video signals from
3D-capable HDMI source devices to the TV via the HDMI Monitor Out
connector. See Connecting Your HDMI Source Devices, on page 12, for
more information.
Composite Video Output connector: If your TV does not have an
HDMI connection, connect it to the BD receiver’s Composite Video Output
connector.
BD300 receiver only: Video signals from source devices connected to
the receiver’s HDMI Input connectors will not appear at the receiver’s
Composite Video output connection. If you are connecting HDMI sources to
the receiver, you must use the receiver’s HDMI Monitor Out connection.
Power Cord connector: After you have made and veried all other
connections, plug the supplied AC power cord into this input and into an
unswitched AC outlet.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL Cinema BD100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL Cinema BD100 in the language / languages: English as an attachment in your email.

The manual is 7.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info