809483
15
Zoom out
Zoom in
Previous page
1/26
Next page
www.jbl.com
English
1515
7.2 Play from the TV source
With the soundbar connected, you can enjoy TV audio from the
soundbar speakers.
OPTICAL
HDMI eARC/
HDMI ARC
TV
1. Make sure that your TV is set to support external speakers
and the built-in TV speakers are muted. Refer to the owner’s
manual of your TV for more information.
2. Make sure that the soundbar has been properly connected
to your TV (See 5.1 Connection with your TV and digital
devices”).
3. To select the TV source, press on the soundbar or TV on
the remote control.
“TV”: The TV source is selected.
In the factory settings, the TV source is selected by default.
NOTES:
If the soundbar is connected to your TV through both an HDMI cable
and an optical cable, the HDMI cable source is selected for the TV
connection.
7.2.1 TV remote control setup
To use your TV remote control for both your TV and the soundbar,
check that your TV supports HDMI-CEC. If your TV does not
support HDMI-CEC, follow the steps under TV remote control
IR learning”.
HDMI-CEC
If your TV supports HDMI-CEC, enable the functions as instructed
in your TV user manual. You can control the volume +/-, mute/
unmute, and power on/standby functions on your soundbar
through the TV remote control.
TV remote control IR learning
Through IR learning, your Infra-red TV remote control can learn
some commands of the soundbar.
1. On the soundbar, press and hold and until
“LEARNING” is displayed.
You enter the TV remote control learning mode.
2. Point your TV remote control at the soundbar. Follow the
screen instructions to operate the buttons on your TV remote
control:
When any one of “POWER”, “VOL+”, “VOL-”, or
“MUTE” is displayed on the soundbar, press the desired
button on your TV remote control.
“DONE”: The functions of the soundbar button are
learnt by your TV remote control buttons.
The soundbar returns to the last selected source.
To stop and exit the TV remote control learning mode,
press and hold and on the soundbar until “EXIT
LEARNING” is displayed.
The learnt functions are discarded.
NOTES:
The soundbar will exit the TV remote control learning mode
automatically if no action is taken for 30 seconds. The learnt
functions are discarded.
7.3 Play from the HDMI IN source
With the soundbar connected as shown, your digital device can
play video on your TV and audio from the soundbar speakers.
HDMI IN
HDMI (ARC)
HDMI OUT
(TV ARC/TV eARC)
1
HDMI OUT
2
.
.
.
1. Make sure that the soundbar has been properly connected to
your TV and digital device (See “5.1 Connection with your TV
and digital devices”).
2. Switch on your digital device.
Your TV and the soundbar wake up from standby mode
and switch to the input source automatically.
To select the HDMI IN source on the soundbar, press
on the soundbar or HDMI on the remote control.
3. Switch your TV to standby mode.
The soundbar and source device are switched to standby mode.
NOTES:
Full compatibility with all HDMI-CEC devices is not guaranteed.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL Bar 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL Bar 300 in the language / languages: English as an attachment in your email.

The manual is 3.25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JBL Bar 300

JBL Bar 300 User Manual - German - 26 pages

JBL Bar 300 User Manual - Dutch - 26 pages

JBL Bar 300 User Manual - French - 27 pages

JBL Bar 300 Quick start guide - All languages - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info