704583
9
Zoom out
Zoom in
Previous page
1/11
Next page
www.jbl.com
English
9
8 RESTORE FACTORY SETTINGS
By restoring the default settings dened at factories, you remove
all your personalized settings from the soundbar.
On the soundbar, press and hold and for more than 10
seconds.
9 SOFTWARE UPDATE
For optimal product performance and your best user experience,
JBL may offer software updates for the soundbar system in the
future. Please visit www.jbl.com or contact JBL call center to
receive more information about downloading update les.
1. Check that you have saved the software update le to the root
directory of a USB storage device. Connect the USB device
to the soundbar.
USB
2. To enter the software update mode, press and hold and - on
the soundbar for more than 10 seconds.
When software updating is complete, you will hear a
conrmation tone.
The soundbar returns to the last selected source.
NOTES:
Keep the soundbar powered on and the USB storage device mounted
before software updating is complete.
10 PRODUCT SPECIFICATIONS
General specication:
Power supply: 100 - 240 VAC, ~ 50/60 Hz
Total speaker power output (Max. @THD 1%): 80 W
Soundbar output power (Max. @THD 1%): 2 x 40 W
Soundbar transducer: 2 x racetrack drivers
Soundbar standby power: <0.5 W
Operating temperature: 0°C - 45 °C
Video specication:
HDMI Video output (With Audio return channel): 1
Audio specication:
Frequency response: 70 Hz - 20 KHz
Audio inputs: 1 Optical, Bluetooth, USB (USB playback is
available in US version. For other versions, USB is for Service
only.)
USB specication (Audio playback is for US version only):
USB port: Type A
USB rating: 5 V DC / 0.5 A
Supporting le format: mp3, wav
MP3 Codec: MPEG 1 Layer 2/3, MPEG 2 Layer 3, MPEG
2.5 Layer 3
MP3 sampling rate: 16 KHz - 48 KHz
MP3 bitrate: 80 kbps - 320 kbps
WAV sample rate: 16 KHz - 48 KHz
WAV bitrate: Up to 3000 kbps
Wireless specication:
Bluetooth version: 4.2
Bluetooth prole: A2DP V1.3, AVRCP V1.5
Bluetooth frequency range: 2402 MHz - 2480 MHz
Bluetooth Max. transmitting power: <10 dbm (EIRP)
Modulation type: GFSK, π/4 DQPSK, 8DPSK
Dimensions:
Soundbar dimensions (W x H x D): 614 x 58 x 90 mm /
24.17” x 2.28” x 3.54”
Soundbar weight: 1.61 kg
Packaging dimensions (W x H x D): 855 x 125 x 145 mm
Packaging weight (Gross weight): 2.6 kg
11 TROUBLESHOOTING
Never try to repair the product yourself. If you have problems
using this product, check the following before you request
services.
System
The unit will not turn on.
Check if the power cord is plugged into power and the
soundbar.
The soundbar has no response to button pressing.
Restore the soundbar to factory settings (See the
“RESTORE FACTORY SETTINGS” chapter).
Sound
No sound from the soundbar
Make sure that the soundbar is not muted.
Select the correct audio input source on the remote control.
Connect the soundbar to your TV or other devices properly.
Restore the soundbar to its factory settings by pressing
and holding and on the soundbar for more than 10
seconds.
Distorted sound or echo
If you play audio from your TV through the soundbar, make
sure that your TV is muted or the built-in TV speaker is
disabled.
Audio and video are not synchronized.
Enable the audio sync function to synchronize audio and
video (See “Audio sync” in the “SOUND SETTINGS” chapter).
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL Bar 2.0 All-in-one at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL Bar 2.0 All-in-one in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JBL Bar 2.0 All-in-one

JBL Bar 2.0 All-in-one User Manual - German - 11 pages

JBL Bar 2.0 All-in-one User Manual - Dutch - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info