Manual JBL AVR580 (page 45 of 72) (English)

810184

Zoom out

Zoom in

1/72

•Before programming the remote for

Volume, Channel or Transport Punch-

Through, make certain that any pro-

gramming needed for the specific TV,

CD, DVD, cable or satellite receivers has

been completed.

Reassigning Device Control

Selectors

Although each Input Selector eis nor-

mally assigned to the category of product

shown on the remote, it is possible to

reassign one of these buttons to operate a

second device of another type. For exam-

ple, if you have two VCRs but no satellite

receiver, you may program the “SAT” but-

ton to operate a second VCR. Before fol-

lowing the normal programming steps for

either Three-Digit entry or Auto Search

code entry, you must first reassign the but-

ton with the following steps:

1. Press the Input Selector eyou wish

to reassign and the Mute Button

at the same time until the red light

appears under the Input Selector e

and the Program/SPL Indicator c

flashes amber.

2. Press the Input Selector efor the

device you wish to program into the

reassigned button.

3. Enter the three-digit code for the spe-

cific model you wish the reassigned

button to operate.

4. Press the same Input Selector e

pressed in Step 1 once again to store

the selection. The red LED under the

reassigned Input Selector will flash

three times and then go out.

Example: To use the CBL/SAT button

to operate a second VCR, first press

the Video 2/CBL/SAT Input Selector

eand the Mute Button at the

same time until the red light glows

under the Video 2/CBL/SAT Button

e. Press the VCR Button e, fol-

lowed by the three-digit code for the

specific model you wish to control.

Finally, press the Video 2/CBL/SAT

Button eagain.

Resetting the Remote Memory

As you add components to your home

theater system, occasionally you may wish

to totally reprogram the remote control

without the confusion of any commands,

macros or ”Punch-Through“ programming

that you may have done. To do this, it is

possible to reset the remote to the original

factory defaults and command codes by

following these steps. However, once the

remote is reset, all commands or codes

that you have entered will be erased and

will need to be reentered:

1. Press any of the Input Selector

Buttons eand the ”O“ Button r

at the same time until the Program/

SPL Indicator cbegins to flash

amber.

2. Press the ”3“ Button rthree times.

3. The red LED under the Input Selector

ewill go out and the Program/SPL

Indicator cwill stop flashing and

turn green.

4. The Program/SPL Indicator c

will remain green until the remote is

reset. Note that this may take a while,

depending on how many commands are

in the memory that need to be erased.

5. When the Program/SPL Indicator

cgoes out, the remote has been

reset to the factory settings.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of JBL AVR580 in the language / languages: English as an attachment in your email.

The manual is 1.06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

JBL AVR580 Manual

Product: