810183

JBL AVR480 Manual

11
Zoom out
Zoom in
Previous page
1/52
Next page
11
Video 2 Video Input: Connect this
jack to the PLAY/OUT composite video
jack on a second VCR or other video
source.
Video 2 Audio Inputs: Connect
these jacks to the PLAY/OUT audio jacks
on a VCR or other video source.
Video Monitor Outputs: Connect
these jacks to the composite and/or S-
Video input of a TV monitor or video pro-
jector to view the output of any video
source selected by the receiver’s video
switcher.
If you would like to make an S-Video
recording from the source connected to
the DVD S-Video Input , you may use
the Video Monitor Output S-Video
jack when connected to a compatible
recording device. However, you will not be
able to monitor the video signal from your
video display.
TV Audio Inputs: Connect these
jacks to the Audio Out jacks on a TV or
other video source.
Surround Speaker Outputs:
Connect these outputs to the matching +
or – terminals on your left and right sur-
round speakers. When making speaker
connections always make certain to
maintain correct polarity by connecting
the colored (+) terminals on the AVR480
(see chart above) to the red (+) terminals
on the speakers and the black (–) termi-
nals on the AVR480 to the black (–) termi-
nals on the speakers. (See page 15 for
more information on speaker polarity.)
Front/Center Speaker Outputs:
Connect these outputs to the matching +
or – terminals on your front/center speak-
ers. When making speaker connections,
always make certain to maintain correct
polarity by connecting the colored (+) ter-
minals on the AVR480 (see chart above)
to the red (+) terminals on the speaker
and the black (–) terminals on the
AVR480 to the black (–) terminals on
the speakers. (See page 15 for more
information on speaker polarity.)
AC Power Cord Jack: Connect the
AC power cord to this jack when the
installation is complete. To ensure safe
operation, use only the power cord sup-
plied with the unit. If a replacement is
required it must be of the same type and
capacity.
Depending on the electrical requirements
in your area or the wiring in your home,
the power cords included with your AVR
may not be the correct ones, and you may
need to contact your local JBL distributor
to obtain the correct power cord.
AM Antenna: Connect the AM loop
antenna supplied with the receiver to these
terminals. If an external AM antenna is
used, make connections to the AM and
GND terminals in accordance with the
instructions supplied with the antenna.
FM Antenna: Connect the supplied
indoor or an optional external FM antenna
to this terminal.
Region Selector: Select the position
corresponding to the country in which the
AVR will be used (C, S or K) so that the
video standard and the FM tuner’s fre-
quency increments will be correct. (See
page 31 for more information on setting
the Region Selector .)
IMPORTANT NOTE: Any adjustments
made to the Region Selector will
not take effect unless the unit is first
fully turned off by pressing the Main
Power Switch 1until it pops out
and the word “OFF” appears on the top
of the button.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL AVR480 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL AVR480 in the language / languages: English as an attachment in your email.

The manual is 0.86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info