809582
8
Zoom out
Zoom in
Previous page
1/18
Next page
88
NOTES:
Make sure that your speaker is connected to the same Wi-Fi network
as your Android or iOS device.
If your speaker is not discovered by the JBL One app, hold and
together for more than 10 seconds to re-enter the Wi-Fi setup mode.
To enable Chromecast built-in, Alexa Multi-Room Music, and Alexa
Cast, please register Google Assistant and Amazon Alexa on the
Google Home app and Amazon Alexa app respectively.
5.1.2 Wired connection with your home network
through an Ethernet cable (Optional)
1. Use an Ethernet cable (not supplied) to connect the speaker
to your home network.
2. On your Android or iOS device, download and launch the JBL
One app for music streaming and control.
NOTES:
On your Android or iOS device, you can rename the speaker in the
JBL One app.
On your iOS device, add the speaker to the Apple Home app and
manage it together with other AirPlay 2-compatible speakers.
On your iOS device, if the speaker has been added to your home
network, you can start AirPlay streaming from an AirPlay-compatible
app (See “7.1.3 Play through AirPlay”).
Availability of online music streaming services varies by country.
Some features require subscriptions or services not available in all
countries.
5.2 Connect to your Bluetooth device
Through Bluetooth, connect the speaker with your Bluetooth
device, such as a smartphone, tablet and laptop.
ON
Settings Bluetooth
Bluetooth
DEVICES
JBL Authentics 200
Now Discoverable
Connected
Settings Bluetooth
Bluetooth
DEVICES
JBL Authentics 500
Now Discoverable
Connected
5.2.1 Connect a Bluetooth device
1. To select Bluetooth source, press .
(Fast ashing white): Ready for Bluetooth pairing.
2. On your Bluetooth device, enable Bluetooth and search for
JBL Authentics 200 or JBL Authentics 500” within three
minutes.
(Solid white): Successful connection.
5.2.2 To reconnect the last paired device
Your Bluetooth device is retained as a paired device when the
speaker goes to standby mode. Next time you switch to the
Bluetooth source, the speaker reconnects the last active device
automatically.
5.2.3 To connect to another Bluetooth device
1. In the Bluetooth source, press .
The speaker enters the Bluetooth pairing mode.
2. Follow the Step 2 under “5.2.1 Connect a Bluetooth device”.
NOTES:
This speaker supports multi-point connection. You can pair a second
Bluetooth device without disconnecting the rst one.
The Bluetooth connection will be lost if the distance between the
speaker and Bluetooth device exceeds 33 ft (10 m).
Electronic devices may cause radio interference. Devices that
generate electromagnetic waves must be kept away from the
speaker, such as microwaves and wireless LAN devices.
Voice commands are not supported in Bluetooth mode.
5.3 Connect to an external audio device
Connect the speaker to an external audio device using
a 3.5mm audio cable (sold separately), with one end
connected to the AUX socket on the speaker, and the other
end to the 3.5 mm audio output connector on the audio
device.
NOTE:
After the audio cable is connected, ensure that no music plays
through Wi-Fi or Bluetooth to start music playback through the audio
cable.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL Authentics 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL Authentics 500 in the language / languages: English as an attachment in your email.

The manual is 2.8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JBL Authentics 500

JBL Authentics 500 Quick start guide - All languages - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info