ENGLISH OPERATION MANUAL
JB SYSTEMS® 5/6 PPC-081 / PPC-082B
Important: always replace a broken fuse with a fuse that has the exact same specifications. If a fuse would
blow up several times, stop using the unit and bring it in for check-up and/or repair.
24. BATTERY LEVEL INDICATOR: (only on the PPC-082B) Shows the power status of the battery.
Charging the battery: When the unit is connected to the mains and the power of the unit is switched
off, the CHARGE Led will be lit when the battery is charging. Once the battery is fully charged, the
CHARGE Led will go out.
THE USE OF BLUETOOTH™:
Connect your mobile device via Bluetooth to stream music from your mobile device to the speaker:
• Switch on the speaker
• Select Bluetooth [bt] in the menu by pressing the [MODE] button. (if no SD card or USB stick is
connected, the menu will automatically be in this mode [bt] )
• Scan the available Bluetooth units with your mobile device.
• The unit can be found under the name “Bluetooth”.
• Make the connection and wait till you mobile device is connected to the speaker (a sound signal
can be heard when both devices are connected.
• You can now stream music from your mobile device to the speaker.
• Adjust [LEVEL 3] and the [MASTER] levels on the speaker. (don’t forget to open also the sound of
your mobile device)
THE USE OF BLUETOOTH TWS:
When you have 2 units of the speaker or a PPC-081 and a PPC-082B it is possible to stream audio
from your mobile device to both units in STEREO !
To do this you have to activate the TWS function.
• Switch OFF the Bluetooth of your mobile device (phone, tablet, …)
• Switch on both speakers
• Select Bluetooth [bt] in the menu of both units by pressing the [MODE] button. (if no SD card or
USB stick is connected, the menu will automatically be in this mode)
• Now press the [TWS Stereo Link] button (4) on one unit. (not on both units)
• The unit will automatically connect itself to the second speaker.
• When both units are linked to each other a sound signal can be heard and [bt.bt] appears on both
speaker systems.
Now you have to connect your mobile device to the first speaker (the one where you pressed the TWS
button) When you will be connected, the speaker will receive the stereo signal from your mobile device, and
it will send one channel to the other speaker
• Switch on the Bluetooth of your mobile device (phone, tablet, …)
• Scan the available Bluetooth units with your mobile device.
• The unit can be found under the name “Bluetooth”.
• Make the connection and wait till you mobile device is connected to the speaker.
• When your mobile device is connected to the speaker, a sound signal will be heard from both
speakers.
• You can now stream music from your mobile device to the speakers in stereo.
BATTERY REPLACEMENT (PPC-082B only):
• Switch the unit off and disconnect the mains cable
• Remove the column speakers
• Put the speaker in a horizontal position, not upside-down !
• Take out the 6 screws (picture 1) to remove the battery cover
• Take out the 2 screws (picture 2) to remove the metal battery holder bar.
• Don’t use a tool to try to remove the battery out of the housing. Just put your had under the battery
and lift up a little bit the top of the speaker. The battery will fall out of the housing in your hand 😊
(picture 3)
• Disconnect both connectors from the battery and connect them to the new battery. Take care to
respect the colors of the connections: Red wire = + (positive pole), Black wire = -* (negative pole)
(picture 4)
• Slide the new battery gently into the housing of the speaker.
