756975
7
Zoom out
Zoom in
Previous page
1/36
Next page
ENGLISH OPERATION MANUAL
JB SYSTEMS® 5/33 MIX6 USB
31. MIC INPUT 2: 6,3mm jack. Accepts an unbalanced microphone with 1/4” mono jack.
32. USB CONNECTION: You can connect any PC through this USB connection. The PC/Mac will detect
your mixer as a sound card, normally no drivers are needed. Since this USB port is bidirectional you are
able to play music on your computer and mix this music with other sources like CD, phono, etc. At the
same time you can record your mix on your computer with the same USB connection!
33. MIC1 COMBO INPUT: Accepts a balanced microphone or an unbalanced microphone.
34. INPUT CHANNEL 2 (LINE): used to connect LINE audio signals The input source selector on the front
determines which input will be active: phono/line (29) or line (34).
35. INPUT CHANNEL 3 (LINE): used to connect LINE audio signals The input source selector on the front
determines which input will be active: phono/line (28) or line (35).
36. INPUT CHANNEL 4 (LINE): used to connect LINE audio signals The input source selector on the front
determines which input will be active: AUX4 (10) or line (36).
37. BOOTH UNBALANCED OUTPUT: Can be used to connect for example a second serie of unbalanced
amplifiers.
38. GROUND (GND) CONNECTION: Many Turntables have a GND-connection. It is preferable to connect
this signal ground to the GND-connector. If your turntable does not have a ground wire, you don’t have
to use this connector.
SPECIFICATIONS
Power Supply: AC 230V~ 50Hz
Power consumption: ON = 20W, OFF = 0W
Fuse: 20mm glass fuse 250V 500mA slow
Frequency response: 20Hz-20kHz (±1.0 dB)
THD + noise: <0.07% @ 1kHz
S/N Ratio (IHF-A): >77dB
Sensitivity:
Micro inputs: 0.0775mV @ 34kΩ
Line/CD inputs: 775mV @ 3.6kΩ
Phono inputs: 0.0775mV @ 31kΩ
Max. Record output: 1V @ 600Ω
Max. Master output: 5V @ 4.7kΩ unbal.
Max. Master output: 2.5V @ 600Ω bal.
Tone controls CH1CH4: +10dB/-12dB @ 10kHz
+12dB/-24dB @ 1,3kHz
+12dB/-29dB @ 50Hz
Tone controls MIC: +16dB/-16dB @ 10kHz
+12dB/-12dB @ 2,5kHz
+15dB/-15dB @ 70Hz
Headphone: 120mW@75Ω
Dimensions: 483(W) x 179(H) x 104(D)mm (19” / 4U)
Mounting depth = 85mm
Weight: 3,2kg
Every information is subject to change without prior notice
You can download the latest version of this user manual on our website: www.beglec.com
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JB systems MIX6usb at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JB systems MIX6usb in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info