602035
62
Zoom out
Zoom in
Previous page
1/88
Next page
62
• Adjusting the needle drop position
The needle drop position can be adjusted by pressing
stitch width adjusting button.
(1) Press the minus (–) key to move the needle drop
position to the right.
(2) Press the plus (+) key to move the needle drop
position to the left.
The indicator window will show the distance between the
guide and left needle drop position in millimeter.
r Guide
t Left needle drop position
NOTE:
The needle drop position will move to the left or right,
but the stitch width is remained the same.
q
w
(1)
q
w
(2)
e
r
Blind Hemming
q Stitch pattern:
w Thread tension dial: A
e Presser foot: Blind hem foot: G
z
x
c
t
r
(1) (2)
qwe
z Fold a hem with the wrong side of the fabric up to form
a 0.4 – 0.7 cm allowance.
q Wrong side of fabric
w 0,4 – 0,7 cm
(1) Fold the hem under the fabric for lightweight fabrics.
(2) On heavyweight fabrics that tend to ravel, the raw
edge should be overcast first.
x Place the fabric so that the fold is next to the guide on
the foot. Lower the presser foot. Adjust the needle drop
position if necessary. Sew while guiding the fold along
the guide.
e Fold
r Guide
c Open the fabric after sewing is finished.
NOTE:
If the needle pierces too far left, the stitch will show
through on the right side of the fabric.
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome TB30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome TB30 in the language / languages: English as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info