472841
34
Zoom out
Zoom in
Previous page
1/37
Next page
30
Troubleshooting
Condition Cause Reference
The needle
thread breaks.
The bobbin
thread breaks.
The needle
breaks.
Skipped stitches
Seam puckering
The fabric is not
fed.
The machine
does not run.
The machine is
noisy.
1. The needle thread is not threaded properly.
2. The needle thread tension is too tight.
3. The needle is bent or blunt.
4. The needle is incorrectly inserted.
5. The needle thread and the bobbin thread are not set
properly under the presser foot at the beginning of sewing.
6. The threads are not drawn to the rear after finishing
sewing.
7. The thread is too heavy, or too fine for the needle.
1. The bobbin thread is not threaded properly in the bobbin
holder.
2. Lint has collected in the bobbin holder.
3. The bobbin is damaged and doesn't turn smoothly.
1. The needle is incorrectly inserted.
2. The needle is bent or blunt.
3. The needle clamp screw is loose.
4. The needle thread tension is too tight.
5. The threads are not drawn to the rear after the finishing
sewing.
6. The needle is too fine for the fabric being sewn.
1. The needle is incorrectly inserted.
2. The needle is bent or blunt.
3. The needle and/or threads are not suitable for the work
being sewn.
4. The needle thread is not threaded properly.
5. The wrong needle is used.
1. The needle thread tension is too tight.
2. The needle thread is not threaded properly.
3. The needle is too heavy for the fabric being sewn.
1. The fabric is too thick.
1. The AC adapter or foot switch jack is not connected
properly.
2. A thread is caught in the bobbin holder.
1. There is thread caught in the bobbin holder.
2. Lint has built up in the bobbin holder.
Page 14
Page 20
Page 18
Page 18
Page 24
Page 24
Page 18
Page 12
Page 28
Change the
bobbin
Page 18
Page 18
Page 18
Page 20
Page 24
Page 18
Page 18
Page 18
Page 18
Page 14
Change the
needle
Page 20
Page 14
Page 18
Page 18
Page 4
Page 28
Page 28
Page 28
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Sew Mini at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Sew Mini in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info