602083

Janome MS5027 Pink ribbon Manual

92
Zoom out
Zoom in
Previous page
1/111
Next page
85
1
2
1
2
1
Si el botón es extremadamente grueso, haga un ojal de prueba.
Si no pudiera meter el botón en el ojal de prueba:
Alargue el ojal desplazando hacia atrás el alojamiento del botón
del prénsatelas para aumentar la longitud del ojal.
Holgura
• Cómo ajustar la densidad de los ojales
Deslice el control de longitud de puntadas para ajustar la
densidad.
Deslice el control de longitud al 1 para hacerlas menos
densas .
Deslice el control de longitud al 0.25 para hacerlas más
densas .
5
4
Haga lo siguiente, si los lados del ojal no quedan equilibrados:
• Si el ojal se parece a el mueva la palanca con un
destornillador (como es mostrado en la ilustración) hacia la
derecha (+) para hacer el lado derecho de ojal menos denso.
• Si el ojal parece a el mueva la palanca con un destornillador
(como es mostrado en la ilustración) hacia la izquierda (–) para
hacer el lado derecho del ojal más denso.
Palanca ajustadora de densidad de ojales
6
1
Si le bouton est très épais, faites une boutonnière d’essai. S’il est
difficile de passer le bouton dans l’ouverture, augmentez la
longueur de la boutonnière en tirant sur le support du bouton à
l’arrière du pied.
Écart
• Comment régler la densité pour boutonnières
Faites glisser le réglage de la longueur de point pour régler la
densité du point.
Faites glisser le réglage de la longueur du 1 pour des points
moins denses .
Faites glisser le réglage de la longeueur du 0.25 pour des points
plus denses .
6
5
4
Si les côtés de la boutonnière ne sont pas equilibrés, faites ce
quin ruit:
• Si la boutonnière ressemble à , déplacez le levier (voir
l’ilustration) vers la droite (+) à l’aide du tournevis, pour rendre le
côté droit de la boutonnière moins dense.
• Si la boutonnière ressemble à , déplacez le levier (voir
l’illustration) vers la gauche (–) à l’aide du tournevis, pour
rendre le côté droit de la boutonnière plus dense.
Levier de réglage de l’équilibrage de la boutonnière.
… 92 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome MS5027 Pink ribbon at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome MS5027 Pink ribbon in the language / languages: English as an attachment in your email.

The manual is 2,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info