Manual Janome MS5027 Pink ribbon (page 89 of 111) (English)

602083

Zoom out

Zoom in

1/111

Mark for placement of buttonhole

Starting point

Slider

There should be no gap.

Spring holder

Difference

Draw both threads to the left under the foot.

Insert the garment under the foot, and lower the needle

into the fabric to the starting point.

Then lower the automatic buttonhole foot.

Depress the foot control to sew a buttonhole. The

machine will stop when the buttonhole is completed.

To sew another buttonhole, you must reset the machine.

Reset by shifting the stitch selector in either direction,

or , to the next setting. Then shift the selector back

to the buttonhole setting “ ”.

Remove the fabric and place a pin just before the

bartack at each end, to prevent cutting bartacks. Cut the

opening with the buttonhole opener.

When finished, push the buttonhole lever up as far as it

will go.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Janome MS5027 Pink ribbon in the language / languages: English as an attachment in your email.

The manual is 2,14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Janome MS5027 Pink ribbon Manual

Product: