Manual Janome MS5027 Pink ribbon (page 31 of 111) (English)

602083

Zoom out

Zoom in

1/111

• Bobbin winding

Pull the handwheel out to the right.

Draw the thread from the spool.

Guide the thread around the thread guide.

For the horizontal spool pin

For the additional spool pin

Thread through the hole in the bobbin from the inside to

the outside.

Put the bobbin on the bobbin winder spindle.

Push the bobbin to the right.

With the free end of the thread held in your hand, depress

the foot control. Stop the machine when it has made a

few turns, and then cut the thread close to the hole in the

bobbin.

Depress the foot control again. When the bobbin is fully

wound, it stops automatically. Return the bobbin winder

to its original position by moving the spindle to the left,

and cut the thread as shown.

Push the handwheel in. The machine will not sew until

the clutch is engaged.

NOTE:

The position of the bobbin winder stopper is adjustable

depending on the required amount of thread on the

bobbin (example: 1/2 full or full). Using a screwdriver,

loosen the screw one turn or less, so that you can adjust

the position of the bobbin winder stopper. Do not take the

screw all the way out. Retighten the screw to fix the

stopper at the desired position.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Janome MS5027 Pink ribbon in the language / languages: English as an attachment in your email.

The manual is 2,14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Janome MS5027 Pink ribbon Manual

Product: