Manual Janome Memory Craft 9500 (page 47 of 109) (English)

602010

Zoom out

Zoom in

1/109

Corded buttonhole

To sew the corded buttonhole, follow the same

procedure as for the Sensor Buttonhole; refer to the

instructions on pages 43 to 45.

Select the pattern 13.

With the Automatic Buttonhole Foot R raised, hook the

filler cord on the Spur on the back of the buttonhole

foot.

Bring the ends of cord toward you under the

buttonhole foot clearing the front end.

Hook the ends of the filler cord into the Forks on the

front of the Automatic Buttonhole Foot R, to hold them

tight.

1 Spur

2 Forks

Lower the needle into the garment where the

buttonhole will start and lower the foot.

Press the Start/Stop Button and sew the buttonhole.

Each side of the buttonhole and the bartacks will be

sewn over the cord. The machine stops automatically

when finished.

Remove the fabric from the machine and cut the

sewing threads only.

Pull the left end of the filler cord to tighten it.

Thread the end of the cord through a darning needle

and draw it to the wrong side of the fabric and cut.

NOTES:

Set the stitch width in accordance with the thickness of

the cord used.

To cut the buttonhole opening, refer to the instructions

on page 45.

A Z

Square BH

13 14 15 16 17 18

SET

Adjust

Pull down BH Lever.

Sensor

Auto

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 9500 in the language / languages: English as an attachment in your email.

The manual is 2,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Janome Memory Craft 9500 Manual

Product: