472822

Janome Memory Craft 6500P Manual

59
Zoom out
Zoom in
Previous page
1/78
Next page
57
Shell Tucking
Machine Setting
Pattern: 06 (Mode 3)
Thread tension:6-8
Presser foot: Satin stitch foot F
Foot pressure: 3
Increase the needle thread tension to “6-8”.
Fold and stitch on the bias.
Place the folded edge of the fabric along the slit of the foot
so that the right swing of the needle falls off the edge of
the fabric to form tucks.
Scallop Stitch
Machine Setting
Pattern: 08 (Mode 3)
Thread tension:3-6
Presser foot: Zigzag foot A
Foot pressure: 3
The pattern 24 can also be used.
Sew along the row edge leaving a 1 cm (3/8”) seam
allowance.
After sewing, trim the fabric edge close to stitching, taking
care not to cut stitches.
Cording
Machine Setting
Pattern: 22 (Mode 3)
Thread tension:1-4
Presser foot: Cording foot H
Foot pressure: 3
Attach the cording foot H.
3-strand cording
Insert 3 strands of cording under the spring of the foot and
draw them under the foot to the rear.
Hold the three strands parallel for even sewing and be
sure to sew over the strands.
Stitch slowly and smoothly, guiding the fabric as you sew.
1 Spring
Single strand cording
Use the center slot on the foot to hold the cording.
Select the pattern 08 in the Mode 1 and adjust the stitch
width to match the thickness of the cord.
1
… 59 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Memory Craft 6500P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 6500P in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info