472823

Janome Memory Craft 6300 Manual

30
Zoom out
Zoom in
Previous page
1/69
Next page
27
Variety of Overcasting Stitches
Overcasting with zigzag stitch
Machine Setting
Pattern: 07
Thread tension: 3-7
Presser foot: Overedge foot C
Foot pressure: 3
Place the fabric edge next to the guide of the foot and then sew.
1 Edge of Fabrics
2 Guide
3 Wires on Foot
CAUTION:
When you use the overedge foot C, you must set the zigzag width
at 5.0 or wider to prevent the needle from hitting the wires on the
foot.
Overcasting stitch
Machine Setting
Pattern: 09
Thread tension: 3-7
Presser foot: Overedge foot C
Foot pressure: 3
This stitch can be used to simultaneously seam and overcast edges
of fabrics.
Use this stitch when you do not need to open seams flat.
Place the fabric edge next to the guide of the foot and then sew.
1 Edge of Fabrics
2 Guide
3 Wires on Foot
CAUTION:
When you use the overedge foot C, you must set the zigzag width
at 5.0 or wider to prevent the needle from hitting the wires on the
foot.
Overlock stitch
Machine Setting
Pattern: 12
Thread tension: 6-8
Presser foot: Overcasting foot M
Foot pressure: 3
This stitch finishes the edges of fabric similar to a commercial
overlocking machine for a professional look.
Place the fabric edge next to the guide of the foot and then sew.
1 Edge of Fabrics
2 Guide
3 Wires on Foot
CAUTION:
When you use the overedge foot M or overcasting foot M, you must
set the zigzag width at 5.0 or wider to prevent the needle from
hitting the wires on the foot.
3
2
1
3
2
1
3
2
1
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Memory Craft 6300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 6300 in the language / languages: English as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info