Manual Janome Memory Craft 6300 (page 19 of 69) (English)

472823

Zoom out

Zoom in

1/69

Automatic Needle Threader

Raise the needle to its highest position by

pressing the up/down needle button twice.

Turn the power switch off.

Lower the presser foot.

z Depress the needle threader knob as far as it will go.

The hook comes out through the needle eye from

behind.

1 Needle Threader Knob

2 Hook

x Draw the thread down around the threader guide and

under the hook.

3 Threader Guide

c Release the threader knob slowly while holding the

thread end with your hand. A loop of the thread is pulled

up through the needle eye.

4 Loop of Thread

v Remove the loop from the threader and pull out

the thread end from the needle eye.

NOTES:

The automatic threader works well with the threads

#50-90 and needles #11-16, including the blue tipped

needle.

The automatic needle threader cannot be used for

threading the twin needle.

If the hook fails to pull a loop of the thread, check the

needle and its setting.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 6300 in the language / languages: English as an attachment in your email.

The manual is 1,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Janome Memory Craft 6300 Manual

Product: