Manual Janome Memory Craft 4900QC (page 73 of 89) (English)

602027

Zoom out

Zoom in

1/89

Editing program

Uniform stitch adjustment (Modes 2 and 3 only)

The stitch width and length of the programmed stitch

patterns can be uniformly altered.

Example 1: To alter the stitch width of the programmed

pattern 27 and its mirror image in mode 3.

z Shift the cursor to the right of the last programmed

pattern q.

x Press the stitch width adjustment button to alter the stitch

width w.

NOTE:

Stitch length can also be uniformly altered when patterns of

the same category (satin stitches or stretch stitches) have

been programmed.

Start sewing. The programmed patterns will be sewn in the

uniform width.

e Default width (7.0)

r Uniformly altered width (5.0)

If you wish to alter the stitch length or width after sewing the

programmed patterns, press the edit key then follow steps

z and x above.

Unified needle drop position

The needle drop position of the programmed patterns will

vary depending on the combination:

t Unified to the left when combining the patterns with

the left needle position and the center needle position.

y Unified to the right when combining the patterns with

the right needle position and the center needle position.

u Unified to the center when combining the patterns with

the left needle position and the right needle position.

i Unified to the center when combining the patterns with

the left, right and center needle positions.

tyui

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 4900QC in the language / languages: English as an attachment in your email.

The manual is 3,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Janome Memory Craft 4900QC Manual

Product: