602027

Janome Memory Craft 4900QC Manual

57
Zoom out
Zoom in
Previous page
1/89
Next page
55
START
STOP
29
Tacking
Machine settings
q Pattern: 29 (mode 2)
w Thread tension: Satin stitch foot F
e Presser foot: 3–6
Tacking is used to reinforce pockets, crotches and belt
carriers where extra strength is needed.
To sew
Depress the foot control until the machine stops automati-
cally.
The machine will sew a tacking 1.5 cm (9/16˝) long auto-
matically.
q 1.5 cm (9/16 ˝)
qw
e
q
r
e
w
t
To sew a shorter tack
To sew a tack shorter than 1.5 cm (9/16˝), first stop the
machine after sewing the required length e, and then
press the reverse stitch button r.
The required length has been determined.
Restart the machine and continue sewing until the ma-
chine stops automatically.
w Starting point
e Required length
r Reverse stitch button
t Tack length
To sew the same size tack
To sew another tack at the same size, simply restart the
machine and it will stop automatically when finished
sewing.
To sew a tack at a different size
To sew the next tack in a different size, press the memory
key and start sewing. Press the reverse stitch button after
sewing the required length.
The required length has been determined.
… 57 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Memory Craft 4900QC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 4900QC in the language / languages: English as an attachment in your email.

The manual is 3,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info