602026
65
Zoom out
Zoom in
Previous page
1/68
Next page
64
Care of Your Machine
1 Screw driver 2 Set screw
3 Needle plate 4 Bobbin holder
5 Lint brush 6 Feed dogs
7 Hook race 8 Soft, dry cloth
Press the needle Up/down button to raise the needle and
unplug the machine before cleaning.
Do not dismantle the machine other than explained on
this page.
Do not store the machine in a high-humidity area, near a
heat radiator or in direct sunlight.
Clean the outside of the machine with a soft cloth and
neutral soap.
Cleaning the Hook Race and Feed Dogs
[1] Remove the presser foot and needle. Remove the
screw on the left side of the needle plate with the
screwdriver supplied with the machine.
[2] Remove the needle plate and take out the bobbin.
Lift up the bobbin holder and remove it.
[3] Brush out dust and lint inside the bobbin holder.
[4] Clean the feed dogs and the hook race with the lint
brush.
[5] Clean the inside of the bobbin holder with a dry cloth
or a lint brush.
* Wipe out gently with soft, dry cloth. You may also
use a vacuum cleaner.
Replacing the Bobbin Holder
1 Bobbin holder
2 Stopper
3 Knob
4 Needle plate guide pins
5 Screwdriver
6 Guide holes
[1] Insert the bobbin holder so that the knob fits next to
the stopper in the hook race.
[2] Insert the bobbin.
[3] Replace the needle plate, inserting the two needle
plate guide pins into the holes in the needle plate.
Replace the screw.
[1]
[2]
[3]
[4]
[5]
[1] [2]
[3]
SECTION V CARE OF YOUR MACHINE
1
1
2
3
4
5
6
2
3
4
5
4
5
6
7
8
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Memory Craft 4800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 4800 in the language / languages: English as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info