602026

Janome Memory Craft 4800 Manual

47
Zoom out
Zoom in
Previous page
1/68
Next page
46
Blind Stitch Hemming
1 Stitch pattern: 16 or 15
2 Presser foot: Blind hem foot G
• How to fold the fabric
1 Wrong side of fabric
2 0.4 to 0.7 cm (1/8” to 3/8”)
3 Overedge stitch
• How to sew
[1]
When the needle comes to the left hand side,
position the fabric so that the folded edge comes to
the left side of the guide. Lower the presser foot.
* Adjust the position of the needle swing with the
stitch width key so that the needle just pierces the
folded edge of the fabric when the needle comes to
the left side.
Sew guiding the folded edge along the guide.
[2] Open the fabric after sewing.
* For a professional looking hem, try not to let the
needle piece more than 0.2 cm (1/8”) into the fold.
If the folded edge is pierced too far to left side, you
can not expect a good seam on the right side of the
fabric.
• Changing the needle position
When the zigzag width key is pressed, the pre-set
needle position is shown at 0.6.
* The indication at 0.6 is the needle drop position from
the presser foot guide.
* When you select the stitch pattern 16, the stitch width
will not change, but the needle drop position from the
foot guide will be changed.
4 The needle drop position is shifted to the right side
5 The needle drop position is shifted to the left side.
6 Guide
7 When the needle comes to the left side
8 When the needle comes to the right side
1
2
2
3
1
4
56
7
8
[1]
[2]
… 47 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Memory Craft 4800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 4800 in the language / languages: English as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info