Manual Janome Memory Craft 300E (page 15 of 48) (English)

602004

Zoom out

Zoom in

1/48

Changing Needles

1 Turn off the power switch. Raise the needle by

turning the handwheel and lower the presser foot.

2Loosen the needle clamp screw by turning it

counterclockwise.

Remove the needle from the clamp.

Insert a new needle into the needle clamp with the

flat side of the needle to the rear.

1 Needle clamp screw

2 Flat side of the needle

When inserting the needle into the needle clamp, push

it up as far as it will go and tighten the needle clamp

screw firmly.

To check needle straightness, place the flat side of the

needle onto something flat (a needle plate, glass etc.)

The gap between the needle and the flat surface should

be consistent.

3 Gap

Never use a blunt needle.

NOTES:

Use the size 11 Blue Tipped Needles for fine fabrics.

For medium to heavy weight fabrics, use the size 14

needles.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 300E in the language / languages: English as an attachment in your email.

The manual is 0,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Janome Memory Craft 300E Manual

Product: