Manual Janome Memory Craft 2400 (page 28 of 43) (English)

602021

Zoom out

Zoom in

1/43

Corded Buttonhole

z For sewing, use the same procedure as the sensor

buttonhole (see pages 21–23 ).

* Set the stitch width to match the thickness of the

cord used.

With the buttonhole foot raised, hook the filler cord

on the spur at the back of the buttonhole foot.

Bring the ends toward you under the buttonhole foot,

clearing the front end.

Hook the filler cord into the forks on the front of

automatic buttonhole foot R to hold them tight.

Lower the needle into the garment where the

buttonhole will start and lower the foot.

R: Automatic butoonhole foot

w Needle thread

e Bobbin thread

x Depress the foot control gently and sew the

buttonhole.

Each side of the buttonhole and the bartacks will be

sewn over the cord.

Remove the fabric from the machine and cut the

sewing threads only.

Pull the left end of the filler cord to tighten it.

Thread the end through a darning needle, draw to the

wrong side of the fabric and cut.

* To cut the buttonhole opening, refer to the

instructions on page 23.

Spur

SEN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 2400 in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Janome Memory Craft 2400 Manual

Product: