Manual Janome Memory Craft 2400 (page 24 of 43) (English)

602021

Zoom out

Zoom in

1/43

............

Sensor Buttonhole, cont’d

x Pull the button holder to the back, and place the

button in it. Push it together tightly on the button.

Button holder

If the button is extremely thick, make a test buttonhole.

If it is difficult to fit the button through the test

buttonhole, engthen the size by pulling the button holder

on the back to increase length.

Gap

c Pull the buttonhole lever downward as far as it will go.

Buttonhole lever

v Draw both threads to the left under the foot. Insert the

garment under the foot, and lower the needle at the

starting point.

Then lower the automatic buttonhole foot.

Mark

t Needle thread

y Bobbin thread

u Starting point

b Depress the foot control until the machine stops by

itself .

* The buttonhole will be automatically sewn: the

front bartack and left row first, then the right row

and back bartack.

The machine will stop automatically.

Before you sew buttonholes on the actual garment,

make some practice buttonholes.

To sew another buttonhole or to start from the

beginning of the buttonhole press the key BH1( ),

then depress the foot control.

1STEP

STEP 2

STEP 3

RAISE

FOOT

PRESS BH1

KEY

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 2400 in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Janome Memory Craft 2400 Manual

Product: