602021
18
Zoom out
Zoom in
Previous page
1/43
Next page
16
• Seam Allowance Lines
The seam guides on the needle plate and hook cover plate
help you measure seam width.
* The number indicates the distance between the
middle needle position and the seam
allowance line.
Marks on
needle plate
Millimeters Inches
15
20 4/8" 5/8" 6/8"
q Middle needle position
w Edge of fabric
e Needle plate guide lines
When Sewing Heavy Fabrics
The presser foot lifter raises and lowers the presser foot.
You can raise it about 0.7 cm (1/4" ) higher than the
normal up position for easy removal of the presser foot or
to help you place heavy fabrics under the presser foot.
q
Presser foot lifter
Pressure Adjusting Lever
The pressure adjusting lever should be set at “3” for regular
sewing.
Reduce the pressure to “2” for cut work, drawn work,
basting and embroidery.
Set the pressure to “1” when sewing chiffon, lace, organdy
and other fine fabrics.
Velours and knits with a lot of stretch may also require a
“1” setting.
q
Pressure adjusting lever
To Raise or Drop the Feed Dog
For button sewing, etc. drop the feed dog.
After finished sewing, raise the feed dog.
The feed dog must always be up for normal sewing.
q
Lowered position
w Raised position
q
w
e
q
q
q
w
15
20
5/8
6/8
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Memory Craft 2400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 2400 in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info