602019

Janome Memory Craft 11000 Special Edition Manual

104
Zoom out
Zoom in
Previous page
1/112
Next page
105
Problem
Slipping layers
The cloth is not feeding
smoothly.
The machine does not run.
Crunching sound occurs
when running the machine.
Patterns are distorted.
The automatic buttonhole
stitches are not balanced.
Pattern selection keys do
not work.
Threads frequently bunch
up on the underside of the
stippling design pattern.
Cause
1. The presser foot pressure is not adjusted correctly.
2. The even feed foot is not used.
1. The feed dog is packed with lint.
2. The presser foot pressure is too weak.
3. The stitches are too fine.
4. The fabric is not fed when sewing is starting.
5. The feed dog is lowered.
1. The machine is not plugged in.
2. A thread is caught in the hook race.
3. The control circuit is not working correctly.
4. The start/stop button is used for ordinary sewing with the foot
control plugged in.
1. Something is caught between the carriage and the arm.
2. The carriage is hitting something around the machine
1. The needle thread tension is too light.
2. The stitch length is not suitable for the fabric being sewn.
3. Feed balancing dial is not properly set.
4. Interfacing is not used for sewing stretch and very fine fabrics.
5. The embroidery hoop attaching knob is loose.
6. The embroidery hoop is hitting something around the machine.
7. The fabric is not stretched tightly enough on the embroidery hoop.
8. The fabric is caught or trapped when sewing embroidery.
9. The embroidery foot is trapped with a jump thread.
1. The stitch length is not suitable for the fabric being sewn.
2. The feed balancing dial is not set properly.
3. Interfacing is not used with stretch fabric.
1. The electronic control circuit is not working correctly.
2. The key position is out of alignment
1. The minimum length of the jump thread cutting is too short.
Reference
See page 17.
Use the even feed foot.
See page 102.
See page 17.
Make stitches longer.
See page 27.
See page 22.
See page 7.
See page 102.
Turn the switch off and
turn it on again.
See page 8.
Remove the object.
See pages 32, 67.
See page 30.
See pages 30, 31.
See page 63.
Use an interfacing.
See pages 68, 91.
See page 68.
See page 66.
Stop the machine and
free the fabric.
Trim the jump thread.
See pages 39.
See page 63.
Use an interfacing.
Turn the switch off and
turn it on again.
See page 21.
See page 23.
Clean the outside of the machine with a soft cloth. Do not use chemical solvents.
Store the machine in cool and dry place.
Do not store the machine in a area of high humidity, near a radiator or in direct sunlight.
The power supply cord can be stored in the hard cover.
Make sure to store the visual touch screen and embroidery carriage arm before turning off the power switch.
… 104 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Memory Craft 11000 Special Edition at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 11000 Special Edition in the language / languages: English as an attachment in your email.

The manual is 18,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info