602019

Janome Memory Craft 11000 Special Edition Manual

71
Zoom out
Zoom in
Previous page
1/112
Next page
72
1 Trace key
You can check the size of the sewing area by tracing the
design outline without stitching or with basting stitches.
When you press the tracing key, the tracing option window will
open. Press the key to start tracing without stitching,
or press the key to open the confirmation window for
tracing with basting stitches.
Press the OK key to start tracing with basting stitches.
The carriage will returned to the starting position after
tracing.
NOTES:
Bring the bobbin thread up before tracing with basting
stitches.
The machine will baste around the embroidery area with a
5 mm allowance when “tracing with basting stitch” is
selected.
However, an allowance will be null If the pattern spreads
over the maximum limit of embroidery area.
2 Stitch back/forward keys
When embroidery sewing has started, the screen will
indicate the current stitch count. The jog keys will
disappear and the stitch back/forward keys will be shown
instead. You can use these keys to move the embroidery
hoop to where the thread has broken or run out.
Press the “–” key to move the hoop back to a previous
sewing point.
Press the “+” key to move the hoop ahead. The hoop will
move one stitch each time the key is pressed. Hold down
the key to travel faster and jump 10 or 100 stitches at a
time
3 Jog/ST key
Press this key to switch the jog keys to the stitch back/
forward keys or vice versa.
To use the jog keys after sewing has started, stop the
machine and return the stitch counter to zero by pressing
the stitch back key.
4 Tension adjust key
When pressing this key the thread tension adjust window
will open. You can adjust the auto thread tension level by
pressing the “+” or “–“ key. Press the default key to
return the tension setting to the default.
5 Tension adjust window
Screen Information
Beside the design image, the approximate sewing time in
minutes, number of colors, design size and the hoop that
should be used for the selected design are shown.
1 Sewing time in minutes
2 Number of colors
3 Total stitch count of the design
4 Design size
START
STOP
Completed
Stitch Counter
00000
Emerald Green 250
1
Auto
ST:126x110mm
2
18 min
6 Colors
7,013 ST 70x79mm
600 spm
2.6
X
OK
+
-
Default
1
2
3
4
Completed
Stitch Counter
Auto
ST:126x110mm
2
18 min
6 Colors
7,013 ST 70x79mm
600 spm
1
2
3
4
㻧㼈㼉㼄㼘㼏㼗
㻧㼈㼉㼄㼘㼏㼗
5
… 71 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Memory Craft 11000 Special Edition at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 11000 Special Edition in the language / languages: English as an attachment in your email.

The manual is 18,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info